248@50 with a 108 lsa 510/510
what is the rpm range of this cam?enough vacuum for pwr brakes?good for a 383,topline 64 cc/190 intake 2.02?and almost most important how will it sound???
also 4.11 now after motor install probably 3.55
unless of course someone feels like santa claus
and want to put a t56 under my tree!!!!
shane

I couldn't find a cam that has those specs in an old Isky catalog - looks like it might fall between the Z-25 and Z-40 solid specs which indicates the rpm range may be around 3000-7500.

Have you tried their website?

If you have a question call them - they aren't quick with answering e-mail.

Is that an Isky Z-27 Cam??

pdq67

Lokks close to the Z-27 like PDQ67 said.

http://www.iskycams.com/category_template.php?sub_category_id=127

Grind No./Type: Z-27 SOLID Great mid-range performance. Lopey idle. 2500 RPM Stall. 3:70-4:11 axle ratio. 650-750 CFM Carb. 10.5:1 compr. RPM-Range: 2800-6800 Valve Lift - INT: .507 EXT: .507 Valve Lash Hot - INT: .018 EXT: .018 ADV Duration - INT: 282° EXT: 282° .050 Duration - INT: 247° EXT: 247° Lobe Center: 108°

Jim