Harold told me to put 1.6's on the intake for the cam he recommended. Summit only sells the COmp Pro MAgnums in sets of 16. DOes anyone know of a place that splits the sets?

MaTt

Try Competition Products, www.competitionproducts.com (http://www.competitionproducts.com)
phone # 920-233-2023

I just checked scoggin Dickey and they want 24.95 a piece for these.

MaTt

You can buy crower stainless in split sets.

Most mfgs will sell mixed sets if you ask for them. Call Summit or Jegs, they have lots more than what is in the catalog.

The factory long slot rockers for the BB are rated at 1.7.

I'm going to assume this is a small block....

Comp's part # is 1302-8, instead of 1302-16. Most anybody can special-order it if they don't stock it.

Crower also sells sets of 8; so that's another way you could go.

I sure wouldn't be putting some factory stamped rubber junk on a motor that's got enough nads that the cam requires that level of attention to detail.