Any one running a Demon Carb on an Air Gap and have power brakes? I see a plug for the power brakes vacuum fitting but the bowls on the demon hang over this and getting a fitting on there looks like it will be tight.

The demon has a large vacuum port but I am thinking the PVC valve would go here. Can I tee off that?

Thanks.
http://www.cardomain.com/ride/2961436

Thats what alot of guys do they put a "T" in the port at the back of the carb and share the PCV and Power brakes.

Dave

if you got room for the hood put a 1" spacer thats what i did

I did the same as above, used the thick phenolic gasket and a street ell to tie in my brakes seperate from vacumn line. Fits very tight under that long bowl carbs. Even had to gring ell down a little for safety.

Thats what alot of guys do they put a "T" in the port at the back of the carb and share the PCV and Power brakes.

You really don't want to do this if at all possible. The oil fumes will eventually contaminate the brake booster. I know this sounds weird in a vacuum enviroment but they will ruin the booster.
FYI...There are carb spacers available that come drilled/tapped for a vacuum port. Or, you can do your own...