I have a 67 ss 396 w/ 4 spd and a 3:55 posi. I don't see any front or rear sway bars. Did the 67 come with them? Were they an option? Should I consider getting them? Thanks.

This link should answer alot of your questions. I happen to like the "look" of
a rear sway bar. :cool:

http://www.globalwest.net/A-body%20questions%20answered.htm

I highly recommend that you install at least a front sway bar. The car will drive much, much better with one.

once you've driven an A body with the correct sized swaybars & tires :D

you'll never go back !!!

If you put the rear sway bar, you will have to box the lower rear controllarms. They tend to tweek and or crush from torque if not boxed. I have been told you can use a front swaybar from many years of gm cars. Can enyone confirm the cars you can chose?

If you put the rear sway bar, you will have to box the lower rear controllarms. They tend to tweek and or crush from torque if not boxed.

What about if you use spacers?

When I ordered my new rear sway bar for my Chevelle it came with thick spacers that were for standard C channel style control arms.

I ended up putting new lowers on anyways but then when I bought my 87 Turbo T Regal it too had the same style c channel lower control arms but it had a factory rear sway bar and spacers in the c channels.