O. K... The time has come to start on the old 68 SS. I am going to replace the radiator support, wheel wells, heater box and rewire under the hood with the engine harness and light harness. Any suggestions on what I should get as far as bushings. bolts, etc. Never did this before. The car is in great shape but the 40 years is starting to show. Thanks for any suggestions
Jan

I had my '69 front end rebuilt with polyurethane bushings. The ride is so tight that when I took the rear sway bar off, there was no noticeable difference in corning. It handles like a new car (a big one). Unfortunately, you can also feel every single bump in the road and even little potholes can be jarring.

If I were to do it over again, I'd rebuild the front end with rubber bushings to have a more comfortable ride, and then beef up the front sway bar and add a good rear sway bar to improve cornering.