Hello, I put a 200 4r in my 68 chevelle. I am looking to buy pre bent trans lines. Which should I buy? The ones for a 400 turbo or 350? I was told externally the 2004r is close to same as 350 so am leaning towards them. But since I dont know what the diff is between 350 and 400 ones. I thought I would ask the experts.
Thx Bill

I believe you are right the 200R4's are like the 350's.

Dave

The 350 lines have to be adjusted a bit to work.

Just did it in September, use turbo 350 lines, in/out lines are opposite. Do yourself a favor and use a tube bender. Love the tranny, low rpm's even with a 4.11 rear and 275/60 tires.

I just installed 350 ones. They went in OK but did need some slight bending at the trans end. This was to clear the header collectors. All else went fine. Thx guys
Bill