What would you recommend for a cam for this?:

GM Gen VI Bowtie Block (24502500) 4.50 bore
Forged stroker crank 4.25
4340 rods H-beam(6.385)
8.5-1 blower pistons
Canfield 345cc Aluminum heads
BDS 8-71 run at 6-8 psi boost
twin Holley 950 HP blower carbs
Fuel sys: Aeromotive Electric
Car 3500lb Chevelle
3.89 geared 9 inch with 33 inch tall tires.
Usage: cruises and a half a dozen trips to the track a year. Want it to run on pump gas.
Any recommendations? Prefer solid lift or maybe solid roller.

Trans: TH400
?? converter??

That combo looks really strong Jeff and should be a complete hand full on the street. graemlins/beers.gif I'd suggest the following hydraulic roller grind from Lunati. It's the same cam I use in the 502 and it pulls very hard.

Part Number 54899 - Grind RRB1-245-250
245 intake - 250 exhaust duration @ .050 lift
.648 intake - .648 exhaust lift w/ 1.8 rockers
LSA of 114 degrees

When do you plan to have the mill finished up?