|
Rantheman Nov 19th, 07, 8:26 PM so my caliper were upside down don't ask how I got that all mixed up. But I have corrected that problem but now my braided line is tighter no kinks in the line and very little slack is this going to be an issue http://i99.photobucket.com/albums/l315/Rantheman96/chevelle099.jpg SS70ElCaminoOwner Nov 20th, 07, 12:38 AM No problem, there is no travel between the axle and the caliper. All are in fixed positions. If this was a front caliper there would be a problem as the caliper travels with the suspension, but the braided brake line would be in a fixed position on the frame. Smittie Nov 20th, 07, 10:57 AM beautiful setup I might add :thumbsup: Rantheman Nov 20th, 07, 11:57 PM No problem, there is no travel between the axle and the caliper. All are in fixed positions. If this was a front caliper there would be a problem as the caliper travels with the suspension, but the braided brake line would be in a fixed position on the frame. thank you i will just leave it then semms like it will work fine. beautiful setup I might add :thumbsup: Thank you too i have worked hard to get her this way | ||