Running comp magnum rocker on a small block and they seem to be more noisey that stock(ticking)gone back over the valve adj. twice, 1/2 turn past 0 asper comp. Using there x-treme energy roller in a factory roller motor, all recomended
by them, any body else noticed this, Thanks Rob..

The rockers are ususlaly much quiter than stock.

However, those cams have very aggressive lobes, they really snap the valves open in a hurry and drop them back onto the seat; they always make more valve train noise than typical old-design lazy cams like the Edelbrock Performer RPM or GM "151" or alot of other common ones.

Thanks, Rob...