70ss454pete
Oct 30th, 07, 11:21 PM
I'm going to have to replace my rocker panels on my 70 Chevelle and was wondering if anyone had done this before. If so, any tips or techniques you could give would be appreciated. Thanks
|
rubadub Oct 30th, 07, 11:29 PM On my website theres a few pages on floor pans, but it shows a drawing of how the pans lay in the rocker, it might help a little bit. Rob 70chevellemalibu Oct 30th, 07, 11:43 PM yea make sure that you have the doors on that you are going to use, i thought all doors are the same i thought wrong and that the gaps all work out. rubadub Oct 30th, 07, 11:50 PM yea make sure that you have the doors on that you are going to use, i thought all doors are the same i thought wrong and that the gaps all work out. I'll second that. Rob 70ss454pete Oct 31st, 07, 8:48 PM Thanks for the info. guys, time to break out the welder! | ||