Bought a correct vintage tach for my 66 SS. Three quick questions:
(1)Is there a standard "spot" to mount unit under dash perhaps using existing cutouts and or screws? (2)Is the tach wired to and through the harness and fuse box(at what point is it joined?) or do the wires poke through the firewall at some point? Where? (3)Were all the wires to these tachs standard colors originally or did they vary?
Thanks for your expertise!
DR
rocks66ss
Oct 6th, 07, 3:31 PM
If you want a template for mounting your tach, email me and I will be more than happy to send it to you.
Rocky
If you want a template for mounting your tach, email me and I will be more than happy to send it to you.
Rocky
Hey Rocky,
Thanks for your reply. I'm new to the forum and Haven't figured out how to navigate. Is your e-mail on the sight or do you have to respond throught the forum. In any event I could sure use the template and any wiring info you have!
DWR
SebJr
Oct 8th, 07, 7:45 PM
Hey Rocky,
Thanks for your reply. I'm new to the forum and Haven't figured out how to navigate. Is your e-mail on the sight or do you have to respond throught the forum. In any event I could sure use the template and any wiring info you have!
DWR
Click on his screen name;)
wayner66
Oct 9th, 07, 9:33 AM
Doug,
Here are a couple of diagrams that should help.
Wayne
rocks66ss
Oct 9th, 07, 6:48 PM
Doug,
I sent the template to you for mounting the tach. IF you have any question about it feel free to email me. I sent it to the email address in your profile. The template is 1:1 when you print it out just cut out with scissors and go. A whole lot simpler than trying to lay it out with the above diagram.
Rocky