Hi guys its been a while so I guess things have been ok, but shes getting ready to come off the road and the time to repair is near. :( Anyway my horm and flasher are inop no power I have traced no power all the way back to the fuse box and I do not have any feed to the hot side of the fuse, of course the wiring diagram shows nothing in detail on the fuse box so before I tear out the harness and split the box does anyone have any suggestions that might make my life easier ???
Thanks Again

Tom

How about at the "BAT" terminal of the horn relay?
Should feed from across the radiator support from the little terminal post -->from pigtail from battery cable.

Just checked it out I must have been in there before the connectors are still disconneted I have constant power to the double green wire that plugs into the horn relay and when the key is on I have power to the other 3 wires I belive one comes from the voltage regulator I am at a lost right now I loaned my friend my assy manual with my wiring diagram so I kinda flying blind but I do have a constant 12 volt source

and when the key is on I have power to the other 3 wires I belive one comes from the voltage regulator I am at a lost right now I loaned my friend my assy manual with my wiring diagram so I kinda flying blind but I do have a constant 12 volt source

Those wires should have power even with the key off. Do you have any power to the fuse box? The horn relay feeds the fuse box, see pic

http://www.chevelles.com/showroom/data/500/medium/Original_Chevy_system.jpg

Thankd for the diagram I have to get my assy manual back so I can trace the wiring by color but I would guess since the dash and everything else besides my hore and flasher I would have power to the relay and out, Niether terminals on the flash have power so I think its in the fuse box,