bigskycountry
Sep 30th, 07, 5:59 PM
Where exactly are they mounted, is there a template, or exact measurements I could acquire,for mounting the SS badges on the fenders. Thanks.
|
69ssmike Sep 30th, 07, 6:06 PM What year??? 1badss396 Sep 30th, 07, 6:32 PM What year???X2:yes: bigskycountry Sep 30th, 07, 7:50 PM Sorry, 1972:D fishhead Sep 30th, 07, 7:53 PM and 69... I dont trust the other picture that someone posted for me...I think I might screw it up... 1badss396 Sep 30th, 07, 8:45 PM and 69... I dont trust the other picture that someone posted for me...I think I might screw it up... I dont have a 72 but here is the one for a 69. use a large peice of paper and tape it to the fender then mark it out first. Click picture to full size:yes: http://img20.imageshack.us/img20/7996/ssdimwq1.th.jpg (http://img20.imageshack.us/my.php?image=ssdimwq1.jpg) fishhead Oct 1st, 07, 6:47 PM yeh thats the one... Where do I start from? Theres not really a starting point. Let me look again... OK I looked...I figured it out. I printed that picture 3+ times taking it over to the car and trying to transpose and I just didnt feel comfortable... Now I got it though... THANKS bigskycountry Nov 11th, 07, 6:05 PM Still looking for the correct fender badge location for a '72 SS,thanks. RixLS6 Nov 11th, 07, 6:14 PM I have a pair of templates that are cut out of original 70 Chevelle SS fenders. They are lined up with the wheelwell edge, the body line, and the rear edge of the fender. After they are put in the right position, which is self-explanatory when using them, you mark and drill the holes. This works beautifully and is really the best way to get it right the first time. ACP1 Nov 11th, 07, 9:11 PM Ausleys has a assembly manual with the measurements in it, however they are hard to read. DO NOT put them on until you are certain where they go. I have seen cars in National Magazines with the emblems in the wrong place and they look awful. bigskycountry Nov 12th, 07, 9:33 PM Where can I find these templates? crazychevelleman Nov 14th, 07, 11:57 PM http://www.thepartsplaceinc.com EM6032V (1968 - 1972 Chevelle ) SS & ENGINE SIZE EMBLEM TEMPLATE - (FOR 70-72 CARS BUT WILL WORK ON 68-69 FOR SPACING EMBLEMS) THIS IS A VINYL OUTER TEMPLATE THAT GETS PLACED ON THE FENDER AND CAN BE EASILY REMOVED BY PEELING IT OFF WHEN DONE. IT GIVES YOU THE PINPOINT LOCATION FOR DRILL HOLES TO APPLY THE EMBLEMS. FOR SS EMBLEMS AND ENGINE SIZE 396 OR 454. $49.00 erb2820 Nov 16th, 07, 7:50 AM Thanks for this info. I'm doing a '72 SS 454 and have the diagram measurements, but I have ordered this and will check the assembly measurements against it. You can't be too sure about these things. Attention to detail goes along way with judges!!!! | ||