I can't seem to find anywhere to get a pair of drum hubs. Anyone out there have a pair they want to unload?

Don't want to pay $300 for Kore3 ones.

If you have disc hubs, I'll trade you.

If you are wanting to do the C5 brake swap using the drum hubs rather than buy the $300 Kore3 ones it requires that you buy a front drum brake setup. That means drum brakes and spindles. What they are calling a drum "hub" is actually just the drum brakes disassembled and the Oustide diameter of the back plate turned down so that the C5 brake rotor fits over it.

I already have spindles from a disc setup, all I need is the drum hub that's turned down.

i think i might have a pair around- they are physically interchangable, but one is drilled for studs with a bigger knurl.
but i'd think if you hit up some good junkyards, you should be able to find some on a 4 door Omega or something for cheap.

I have some drum hubs in Fairfield.

ss,
I have a set that have been glass beaded and have new bearings and races. I decided to go discs after I did all the work. PM me if interested. The picture shows the entire assembly, but I have already used the spindles, so you would be getting the hubs and bearings only.

http://www.chevelles.com/showroom/data/500/drumbrakes_flash.JPG

I can't seem to find anywhere to get a pair of drum hubs. Anyone out there have a pair they want to unload?

Don't want to pay $300 for Kore3 ones.

Empty your PM box. I got hubs, spindles, etc.

ss,
I have a set that have been glass beaded and have new bearings and races. I decided to go discs after I did all the work. PM me if interested. The picture shows the entire assembly, but I have already used the spindles, so you would be getting the hubs and bearings only.

http://www.chevelles.com/showroom/data/500/drumbrakes_flash.JPG

Thanks for the offer Bill, I grabbed a pair locally. Thanks guys