So the engine kit I ordered from Wolfplace came in today. Every thing looks great and cant wait to start installing. Here is a the kit (http://chevelle.ogleonline.com/pictures/chevelles/cord/enginekit.jpg) I would happily recommend Mike to anyone on the board!

The kit has

Fel-Pro gasket set
Fel-Pro head gasket .015
EPWI double roller timing chain
Brass plug set
Clevite 77 main bearings
Dura-Bond cam bearings
Sealed Power piston rings
Speed Pro coated, flat top, hypereutectic pistons
Melling oil pump and screen

It is going into a standard 350 with
stock crank
stock rods
ported and polished 624 heads
Edelbrock RPM intake and 750 carb
a UD 272 H10 cam with 110 lsa and UD 100 lb springs
stock hei
stock converter
TH-350
peg leg 8.2 2.73
dynomax 1 5/8" headers to a 2.5 x-pipe that dumps at the rear axle

With the stock deck and heads the pistons along with the .015 gasket should give me a 9.1/1 cr. This engine will be a total upgrade from my smog truck 350 that includes crap smog heads, old edelbrock single plane truck intake, a tired truck cam, and a some what big 750. Oh also my current engine has the rocking 7.8/1 cr.

I am building every thing my self in my engine rebuilding class and did all the porting my self. So far I am very happy with my first efforts.

Thanks for the kind words & letting us help you, graemlins/waving.gif

Glad you got everything & are happy with it.
I also sent you a set of HD locks & umbrella seals in a seperate package priorty mail.
Let me know you got it ok.

Yes I did get them thank you.

The check for the new head gasket is in the mail today graemlins/thumbsup.gif