Help :( , Does anyone have the rod bolt torque specs and stretch measurement for Eagle H-beam rods with ARP 7/16 bolts? I have a small journal set going in my son's 327 and a BBlock set for my engine but can't find the paperwork that came with these!

I know the torque on my 6" H Beam 3D Large Journal was 73 FT. Lbs. I dont recall the stretch tho.

Bob,
Call Eagle, they have changed the torque a couple of times. Also...the torque spec they will give you is using ARP Moly lube on the bolts. If you are going to use oil, it will be substantially higher. If you have a stretch gauge, that is the best way to do it, and the torque will not matter.

ARP bolts are their own torque requirements i believe.. Just goto the ARP page and look up what bolts are on it! if you dont have ARP's on your rods go get some ;)

Thanks, I'll check out the arp site.