Posting here as well.

A freind of mine has a plating shop and is willing to replate my booster for me and my brake caliper brackets. Years ago I disassembled a booster to get it chrome plated. I recall lightly taping the tabs with a hammer and screw driver evenly all around and it worked. Does any body here have any other tips on doing this carefully? And also same on the assembly.


Thks

Rich



------------------
70 SS - L34
Member # 442
www.chevelles.com/showroom/richr1 (http://www.chevelles.com/showroom/richr1)

Rich if you have an old master cly or if you are taking it off with master leave the mounting brackets on, clamp master in vise using a big bar in the brackets twist it loose.It should come this way remember these have a spring inside.Remove the parts you are not going to plate,(master,brackets,ect)...FRED

------------------