I'm putting together a 454 and i need cam help it's going in a 72SS convt. I'm try to the make it as close to a ls6 or ls7, go with a stock ls6 cam or something else? I want good street power with that can be driven
thanks
dave

You didn't mention what you want to use this for, what compression ratio, what cylinder heads, what trans, what gear. Driving a car on the street with 11:1 pistons is cool in my book, but then again $3.00 plus per gallon of gas can get into your wallet big time! Ls6 and ls7 are super motors, but I would have to think that there are much better cams designs available today than were twenty years ago when those motors were new. I called Crane and used their recommendation on my 454 and am very happy!

If you want the specs on the LS-6 or the LS-7 send me an e-mail and I will pull out my book. I have an LS-6 that I just rebuilt and I made sure I had all of the specs correct before I did it.

Scott fototek@mediaone.net