casting # 10110810
They came off of an mid 90's 3500 series pick-up.
Thanks for the help.

Rich

Mortec didnt bring anything up. http://www.mortec.com/bbc.htm

sorry it is a small block head

10110810...91-up...350..........Gen. 1, 65cc chambers

sorry it is a small block head

Never knew of a 1 ton coming with a 5.7.

But Step and Cargo Vans did right up until they finally did away w/ the old L-48 engine design about 3 or 4 years ago if I remember right!!

pdq67

But Step and Cargo Vans did right up until they finally did away w/ the old L-48 engine design about 3 or 4 years ago if I remember right!!

pdq67


Touche.

But, it was a pick em up truck he said they were off of.

Its a swirl port head almost indentical to a 193 except for the hardend ex seats and 3/8 diameter ex valves.

Touche.

But, it was a pick em up truck he said they were off of.

Definitely came off of a pick-up truck. Definitely was a 350. I know because I scarfed up the block. Says 350 right on it. It is a 2 bolt main with a one piece rear seal. The cam was a flat tappet hydraulic. It doesn't look like it has a provision for a mechanical fuel pump. I am thinking of building a 383 "spare" engine.

Rich