I got a '67 elco that had power 4 piston disc brakes. I replaced the front brakes with a wilwood kit and I am going to a manual master cylinder. I need to know where I can find a pedal pushrod for the manual mastercylinder. The power brake pushrod is permanently in the booster so I need a new one. I could make one but I dont want to do that if I dont have to. Anyone know where to get one at??

Are you talking about the rod between the pedal and the power booster, or the push rod between the power booster and the master cylinder. The one between the power booster and master cylinder is removable.

I am removing the power booster so I need a new rod between the pedal and the master.

I have a wilwood kit on my 66. You didnt say which master cylinder? I know if you have a WIL-230-8555 master cylinder,you need the pushrod number WIL-230-9384 pushrod,I think it's about 10bucks thru Summit.
I went from power to manual on my car,just unscrew the bracket on the old pushrod,and nut. Then,all you need to do is,put bracket,and locknut on your new pushrod,and ajust. I hope this helps you out:beers: