Brand new system including lines, master cyl, hold off valve the works.

I had no problems with the rear, but I can't get any fluid or air for that matter out of the front brakes lines.

Anybody know what I should look for?

Thanks

It took a while to get all that air out when I did mine, I did use a bleeder from Eastwood and I'm sure it helped. Once I got mostly fluid I finished off the old fashioned way of using an assistant on the pedal. If you don't have one, I recommend a bleeder.

Try each section of the lines first. Breakthe line loose at the caliper, then where the solid line and rubber line meet, then the proportioning valve, then the master cylinder. That way you can trace where the problem may be.

I had trouble on a completely dry system as well. Used the Russel Speed Bleeders and it seemed to 'speed' up the process. Other than a power bleeder.