Hi, I bought a complete power window and door lock set up for my 1970 Chevelle SS, but can't find the wiring diagram in the AIM. I did a search and can find post about this but they are older and can't seem to bring up the drawings. Can anybody help me with this information? The set up is from a 1971. I have it pretty much figured out except the two larger orange wires with the black stripe with the male ends and the two smaller plugs with the needle like connectors. There is also a smaller pink wire that I'm not sure of. Any help would be much appreciated.

Thanks,

There's a guy with a easy to follow write up at Buickperformance.com that has text and photos. Made mine easy to set up.

Thanks, I got it printed off. Looks very detailed, wish me luck.

Ernie --Did you get the rubber wire boots for the doors and the plastic rivits that hold them in, I have a hunk of door with the org. holes for the boot placement. The circut breaker for the windows goes behind the brake booster. Also a window relay is mounted behind the left kick pad on a shelf by your left ankle. Bob

Bob, I got the boots with the harness, and the relay behind the kick panel came with it too. The intsructions I got from the Buick website tells where to put the holes. I'm not sure about the circut breaker behind the booster?? Do you have any pictures of that??

Thanks,