I need to replace the chrome header corner on the right side of my 67. I only see one screw on it. Is there a certain way that I need to take it out so that I can replace it with a new one? The old one is kinda rusty, and I picked up a new one. Thanks

They kind of snap on to the header.
Take the screw out and pry up nice and easy from the interior side.
It should pop off.
Then line the new piece up from the outside first, and snap it down.
I hope this helps.

Cool, thanks. That is what I thought, but I didn't want to go prying and break something else in the process.

Just replaced the part, for anyone else that needs to know. There is a screw on top of the header corner that needs to be taken out, then remove the visor bracket, which is two screws underneath, and one screw facing the front of the bracket. Then peel down the pillar weatherstrip about two inches as there are two screws behind that, then gently pry off. I used a flat head screwdriver, just to get it started. Took me about 30 minutes start to finish.