I will finally be installing my custom made (by me) dash after lagging for 7 months.

I need to find a solid ground somewhere under the dash to wire my gauges to.

What is the best location for this?

Thanks

Well i decided to run all my 18ga grounds to a common point. I actually did this about 4 months ago. I put them all to a common point. From there I ran 10Ga wire through the firewall and connected it to mthe firewall where I have a ground strap connected. Figure that's about as good of a ground as you can get.

Well i decided to run all my 18ga grounds to a common point. I actually did this about 4 months ago. I put them all to a common point. From there I ran 10Ga wire through the firewall and connected it to mthe firewall where I have a ground strap connected. Figure that's about as good of a ground as you can get.
Just about. The best would be wiring everything directly to battery negative, but that is not realistic.

Where the column bolts up is a decent place, or the e-brake mount.