frogg469
Aug 13th, 04, 1:12 AM
How does this combo sound to you guys? I’m not sure about the cam and other stuff but this is what I have in mind!
408 sbc (what I have now)
Scat 9000 crank (3.75 or 3.875?) (mine’s junk)
Scat I beam capscrew Rods (5.7 or 6?)
SRP forged flat tops or Sealed Power Hypers $$??
Lunati Part# 40135 SOLID cam
@50=244/254
.532/.552
106 sep/102C/L
Iron Eagle 72cc Chamber Heads, 200cc Intake Runner Heads, 2.02'' Int./1.60'' Exh. (not sure)
Performer RPM
Holley 750 vac secnd
This will be in a '84 Elky, th350 built some , Eaton 3.42 posi. Just going to be a weekend street/strip toy !! How much machine/clearance work would need to be done to go with the longer stroke? Also what compresion would this be? Any suggestions are appreciated!
Thanks,
Frog
graemlins/beers.gif
408 sbc (what I have now)
Scat 9000 crank (3.75 or 3.875?) (mine’s junk)
Scat I beam capscrew Rods (5.7 or 6?)
SRP forged flat tops or Sealed Power Hypers $$??
Lunati Part# 40135 SOLID cam
@50=244/254
.532/.552
106 sep/102C/L
Iron Eagle 72cc Chamber Heads, 200cc Intake Runner Heads, 2.02'' Int./1.60'' Exh. (not sure)
Performer RPM
Holley 750 vac secnd
This will be in a '84 Elky, th350 built some , Eaton 3.42 posi. Just going to be a weekend street/strip toy !! How much machine/clearance work would need to be done to go with the longer stroke? Also what compresion would this be? Any suggestions are appreciated!
Thanks,
Frog
graemlins/beers.gif