Does anyone know the ICL on the 214/224 with 112 ls and the 224/224 with a 114 ls?

Did you contact Summit?

Originally posted by Dragn70:
Does anyone know the ICL on the 214/224 with 112 ls and the 224/224 with a 114 ls? Wherever you put it :D
Seriously, barring info to the contrary I would put it 4-6 advanced. 106-108.
Usually found this to be a pretty good starting place for most cams.

I'm trying to find info for a friend. He put the cam in, I just wanted to no how its ground.

Per my old WBR cat., the 214/224 cam is 112/107 and yes the 224/224 cam is straight up at 114/114 FWIW!!

Leave it like it is b/c it is made 5 degrees advanced already...

pdq67

Almost positive these are the generic lobes almost all the less expensive guys have & are the same as the old Wolverine Blue Racer stuff.
The 214/224 is 107/117 & the 224/224 is the same.
They also (Wolverine) had a 224/224 on 114 sep that was 114/114
Wolverine numbers were:
WG1159
WG1173
WG1170
There was also another 214.224 that was 100/124 (WG5072) :eek:

Thanks for the info.

Wolfplace,

Where did you find the WG-5072 cam spec's??

My # 90 cat. doesn't list it..

Anyway, it appears to be a 114/100 cam which is kinda weird ta say the least like you mentioned??

But isn't the LS1 cam like 119.5/117.5 so to me is weird too...

pdq67

Originally posted by pdq67:
Wolfplace,

Where did you find the WG-5072 cam spec's??

My # 90 cat. doesn't list it..

Anyway, it appears to be a 114/100 cam which is kinda weird ta say the least like you mentioned??

But isn't the LS1 cam like 119.5/117.5 so to me is weird too...

pdq67 pdq,
you have mail graemlins/waving.gif

Thx,

I just got everything on my Desktop for now until I can look it all over.

pdq67

I have a PAW 214/224 cam and according to the cam card the ICL is ground at 101...Also advertised duration is measured at .005...280/290...pretty mild cam though.