got an alignment today, here are the specs:

LF RF
Caster -0.9 deg -0.9 deg
Camber 0.6 deg -0.1 deg
Toe 0.05 in 0.00 in

Does this look ok for a 68 chevelle/Beaumont with 454 and 235/60/15 front tires.
They said they had to do do alot of adjusting to get it right, but I'm not so sure.

Thanks, Rob

I would try for positive caster (as much as possible, and equal on both sides), and a little more negative camber, as these cars typically wear the outside edges due to the backward camber curve.

Can you take a picture of the upper A-arm shafts to see if there's any room for more shims to adjust?

Thanks, Derek69SS

I have lots of room for more shims(1" of thread left on shaft bolts) about same on both sides....will post picture later if needed.

Rob