I have a couple questions now and probably many more later about my interior reassembly.

First question: Is this dome light routing look correct so far and where does it go from here? It had to come back out of that hole above the quarter window, now where?

http://www.chevelles.com/showroom/data/500/medium/DSC04523.JPG


Second question: The vacuum hose that went on the passenger side kick panel vent had a metal clip taped to it when I took it apart many years ago.

Now I can't remember how the heck it installs on the vacuum hose.:clonk: Any ideas?

http://www.chevelles.com/showroom/data/500/medium/DSC04524.JPG


Thanks for the help.

Mike

The metal clip is the same as my 70 with A/C. Take the metal clip and hold it so one part of the metal clip goes over the metal tube and the other half goes behind the vac. hose mount. The job of this clip is, To keep the Vacuum hose from comming off. In other words When this clip is in place the hose can not slip off. It is a locking clip. If you need more info the manual shows the clip mounting.
When I put mine together, I F####D with that clip for a long time and then made a phone call. When you get it on you will laugh a bit!!!!!!!!!! Bob ACES---AACA:hurray:
P.S. The clip mounts Vertical

Thanks for the help Bob, I haven't messed with again yet, but maybe you can answer one more question about it. Since you said it mounts vertically like I have it in the picture, does the open up point up like shown or down?

Thanks
Mike