Anyone have any pics of the Headliner installed with the shoulder seat belts and clips and all that?

I have the 3-point belts installed, but haven't put in the headliner yet. It shouldn't be an issue. There's a bracket that mounts in the stock shoulder belt location and re-uses the same hardware. If doing a new install will result in a cleaner install as you can mount the bracket under the headliner. If updating an existing system you can re-use the vinyl hardware cover to cover the bracket, all in all an easy install in about an hour or two and they work very well.

Thanks for the reply but im talking about the original factory belts not aftermarket. My car was a bench seat with only lap belts. I bought a set of factory original shoulder belts and need help with where the clips go and all.

Sorry, All the holes are in place, but if the headliner is in place some of the holes may be tough to find. You may have to pull back the headliner ,carefully, to expose the mounting points. Going by pics will get you close. when I install a headliner I leave the screws in to make it easier to locate the mounting holes and then score the headliner to expose the screws and mount the brackets ans stuff. Good luck