Just recieved the new Procharger catalog. It's gonna be a long winter. This looks pretty interesting...............anyone have any experience with this?

Only with the catalog. It's dog eared with drool all over it from looking at it so much. I visited their display at a Super Chevy event, very impressive stuff. There's so many levels of boost, intercoolers, bypass valves, etc. you really need to do some homework or better yet find one of their dealers that'll let you bend their ear.

I have a P600b pushing about 6 psi of boost on my 454. I have oval port heads, hydraulic cam, mainly stock bottom end and an 800 Holley prepped by SD Concepts. Based on my most recent time slips, I pushing close to 700 hp at the flywheel. My car ran 12.20s@108 on the motor, my best pass to date with the procharger is a 10.77@128. The P600 is a pretty outdated blower, I don't think they even make it any more. With better parts in the engine and a little bigger blower there is a lot of potential. If you get serious about doing something call and talk to Scott at SD Concepts (www.sd-concepts.com) he is one of the most knowledgeable guys I've talked to. He prepped my carb and it's worked great.

there are a couple of good boards to goto if you are intersted. I have a D1 that im going to stick on my BBC, however, I have not got around to it yet.

Bob
http://www.superchargerhelp.com/index.php?
http://www.boards2go.com/boards/board.cgi?&user=huntracers
http://www.turbomustangs.com/forums/forumdisplay.php?s=5b9af64d3620d655db504e927169fcc f&forumid=13

Yes, I've done four on small and big blocks. Scott listed above is the guy to go to.

http://www.camcojb.com/zl1index/zl1motor3.jpg

http://www.camcojb.com/estel/dons69%20032r.jpg

Jody