|
Twilightoptics Apr 29th, 04, 8:35 PM 350, .030 over, 2bolt, balanced turned 10/10: Mains: 1---.0015 2---.00125 3---.0015 4---.00125 5---.002 Rods: 00145-.0018 Checked with a plastigage Nickel333 Apr 29th, 04, 8:58 PM too tight RB69SS396Conv Apr 29th, 04, 10:32 PM A little tight, not too bad, I'd run 5W-30. If this is Plastigage, don't believe it. About all that will tell you, is it looks like you at least have the right bearings. What's the crank diameters, measured with a micrometer? Twilightoptics Apr 29th, 04, 10:56 PM Don't have a mic. Just turned 10 from a reputable machine shop who did the rods too. Spins nicely?! | ||