motown/malibu
Dec 14th, 04, 4:45 PM
anyone have the new dart big m block if so what is the thickness measurement between your cylinders spec out to be ?>mine is .325 does this seem right
|
: anyone else have the new dart big m pdq67 Dec 14th, 04, 8:15 PM Imho, I would figure the siamese wall thicknesses would be 4.84" minus the bore... Is this right??? pdq67 TD509EFI Dec 14th, 04, 8:23 PM Mowtown, I have the Big M tall deck block, minimum wall thickness, according to the Dart data sheet, is 0.300" @ 4.625" bore. Plenty beefy. I don't know if you have the 4.500" or 4.600"bore, for the 4.500" it's ~ 0.363" thick. John motown/malibu Dec 14th, 04, 8:52 PM its finish bored to 4.625 tall deck for the 5.250 stroke building a 706 street motor RussD Dec 14th, 04, 10:28 PM Lotto pay up yet? | ||