I bought new vinyl for the rear panels in my convertible. I was wondering what I should use to attach the new vinyl to the metal? I'm wire brushing all the surface rust off so It should stick good. Also, Do I need to remove the old cardboard backing off of the metal panels before installing them?
Thanks

I guess this would really be considered the arm rests instead of the rear panels like I put in my post. Sorry

I guess I'll just pick up some spray adhesive from the parts store unless somebody knows something better?

If you do use spray adhesive,use 3M Super Trim Tack Adhesive they have a few choices,but I recommend the 8090.It is the best one they have,or if you have an air compressior and an old paint gun(not gravity fed) you might find a trim shop around you and try to buy a gallon of glue from them,and use the paint gun to spray it that way.

Thanks Junior I appreciate the advice.

No problem.:beers: