Has anyone purchased a Dash harness for a 69 Chevelle? It's a gauge car and although the harness is nicely fabricated (M&H Harness) the bulbs for the indicator lights are really loose in the sockets. In fact a couple fell out and were rolling around inside the Bezel. I've since pulled the dash out again but I'm not seeing a clear fix for this issue. Probably have 5 or 6 of the sockets that are loose, the rest seem a little tighter. Appears to be the plastic mold that's just a little to big. Any help would be appreciated. Thanks.

If they're anything like the original 69 sockets, they come apart very easily letting the bulb fall down into the cluster. (they suck)
I glued mine back together with epoxy.

http://www.chevelles.com/showroom/data/500/dlapart2.jpg

Seems to be in the plastic mold where the bulb tabs are suppose to fit in the grooves or molded notches. Just not quite the perfect fit are they. Guess a little dab of glue could work. How about building the bulb base up with some solder and filing excess off for a nice tight fit??
Kinda sucks to have to even do it I know.
Thanks Dean.