|
Blondeguy89 Apr 16th, 07, 12:14 PM I will be buying a new intake and carburetor. The new intake and carb will be 4bbl. Will i need to do and special things if i had a 2bbl berofre or should it all just bolt right up? I plan on getting a holley 300-36 intake with the 8045 600cfm carb. Will all this work together. novaderrik Apr 16th, 07, 2:54 PM you will need a different fuel line setup, and a different throttle rod (or make the one you have work).. plus about a dozen other little things that will pop up like pipe plugs for unused vacuum and water ports, and a way to hook the PCV valve up. Blondeguy89 Apr 16th, 07, 5:30 PM dang it not waht i wanted to hear, but i guess its one of those figure it out as you do it right? | ||