I'm taking the car off the street this year and pondering the idea of switching over to a FAST efi setup where I'd like to run a 88mm or bigger turbo on this thing. I'm gonna turn the car into a full tube car where as it's back halfved now. I'm hoping to go somewhere in the mid to low low low 8's or maybe a high 7. It's going to be a outlaw 10.5 type car. Who makes the best turbo's for say a 521ci or so motor? Thanks a lot for the suggestions or tips!!

I hear alot of good things about Precision Turbo. Check out www.precisionte.com (http://www.precisionte.com) and look under mustang turbos. They got everything up to 106 mm turbos with multiple options on each (compressor trim, Turbine A/R etc.)I plan on using them when i do a turbo motor.

Thanks man.

http://www.proturbokits.com/index.htm

Bob

Cant remember who it was, someone here will know who he is.. He has a twin turbo 632 tube chassis Chevelle with 2 PT-88's runs deep in the 7's.. Very crazy looking car. He was also featured in car craft. I think it was a 70??

Some other places to check out, in no particular order:

http://www.boards2go.com/boards/board.cgi?&user=huntracers
http://www.grapeaperacing.com/GrapeApeRacing/
http://www.chargedair.com/
http://www.conleyracing.com/
http://www.thedodgegarage.com/
http://www.fasttrackperformance.com/
http://www.dallasturbo.com/main.html
http://www.majesticturbo.com/
http://www.montygwilliams.com/
http://64.225.76.178/main.htm
http://www.precisionte.com/
http://www.skulte.com/
http://www.hangar18fabrication.com/swtracing.html
http://www.turbotechnologyinc.com/
http://www.turboford.org/index.shtml
http://www.turboneticsinc.com/

Bob

Here is the link to that turbo Chevelle I was talking about

http://www.chevyhiperformance.com/featuredvehicles/77038/

HTH

Gene