My holley fuel pump is threaded for 3/8 pipe, and I need an adapter to go to 3/8 flare for the fuel line up the carb. All I need to do is run a regular hard 3/8 line from the pump to the carb. I went to three auto parts stores today with no luck, and I couldn't find anything on jeg's.


Any idea where I could find an adapter like this? Fastenal maybe?

try http://www.aeromotiveinc.com/system.php

they might have what you need.

get a reducer to get it down to 1/4" pipe, then grab a vacuum fitting off the back of a q-jet or 2GC carb where the brake booster line goes.

If you don't mind brass. You can buy a 3/8 male pipe thread to 3/8 male flare at Home Depot or Lowe's.