|
: Engine block number verification Rudy's 65 Mar 31st, 07, 7:58 PM Greetings! I have an engine block number and would like to know what year of vehicle it would have been in. F0209C Correct me if I am wrong, F= Flint 02= February 09= Ninth day C= ? Thanks. Rudy;) mr Mar 31st, 07, 9:26 PM I have an engine block number and would like to know what year of vehicle it would have been in. F0209C Correct me if I am wrong, F= Flint 02= February 09= Ninth day C= ? "Chevrolet by the numbers" 1965-69 and 1970-75, does'nt list any engine codes, until the 1970 model year, that start with [C]...... and those had [3 letter codes].....Don. shooter Apr 1st, 07, 1:52 PM The single C was used for 57 Impala 265/2bl, and 58-64 Impala with 283/2bl base engine. The casting number and cast date on top rear of engine will help verify engine size and year. Rudy's 65 Apr 2nd, 07, 6:58 PM The single C was used for 57 Impala 265/2bl, and 58-64 Impala with 283/2bl base engine. The casting number and cast date on top rear of engine will help verify engine size and year. Where on the top rear of engine - on the drivers side, passenger side, at the middle? Is it near the distributor? Just so I know where to put the mirror. Thanks. Rudy gummy Apr 2nd, 07, 7:17 PM On the drivers side just behind the head on a lip . shooter Apr 2nd, 07, 8:32 PM Casting number looks like this http://www.mortec.com/cast13.gif cast date looks like this http://www.mortec.com/cast7.gif Rudy's 65 Apr 3rd, 07, 7:15 PM Thank you very much. I'll check it out in the next day or so and let you know what I found out. Rudy:) | ||