Which part number is everyone using for their Moroso solid big block motor mounts on a '69? I'm assuming it is the 62510 and 62610 combo? They list the 62530 as the correct one for 68-69 chevelle but there is no corresponding frame pad that I can find. The 62510 is listed as 68-69 full size big block.

Thanks!

You use the existing frame stand in the car. Or you get them from year one or like that. As far as full size chevrolet, that is an impala not a chevelle.

Mine was originally a 307 car so I'll have to buy new pads anyway. I didn't realise you used the stock pads with the Moroso mounts...I assumed you needed both sides.

Thanks:thumbsup:

Mine was originally a 307 also. But I think the 70-72 use the same stands regardless. The 68-69 might have a different stands for the big and small block.

Yep, in 68-69 the bb/sb mounts were the same except the 307 had it's own.

I don't know for sure what the difference is but my 540 is sitting on the 307 frame stands in my car. I've heard that they are different but I've had 2 different blocks in the car and the stands haven't been touched.

Good to know. I have seen pictures of both pads with dimensions on here before so I'll have to check exactly what I have.

Thanks for the help.

what are the measurements for the bb pad, and for the sb pad. thanks..