: Let's Hear Them....


Pages : [1] 2

flink69SS
Mar 26th, 07, 4:56 PM
How about those exhaust systems...Whatcha got? Let's see and hear them videos of that fat chop like Ratbones2002.http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=2014017643
I am running a Comp Cam CB 290 with a 578 lift and it sounds wimpy. 2 1/2" with 40 series FlowMasters and looking for a change.

Make sure to tell the details...:yes:

Thanks Team...

DOUG G
Mar 26th, 07, 5:21 PM
406SB,9.5:1,280H CompCam,Flowmaster American Thunder 2.5"

http://s10.photobucket.com/albums/a130/Dougs68Camaro/?action=view&current=DSCF0001.flv

1bad69+70camaro
Mar 26th, 07, 5:27 PM
i am going to love this.

flink69SS
Mar 26th, 07, 6:11 PM
406SB,9.5:1,280H CompCam,Flowmaster American Thunder 2.5"

http://s10.photobucket.com/albums/a130/Dougs68Camaro/?action=view&current=DSCF0001.flv

Doug- That sound sick...:D
It sounds like 3" pipes and I like it....:yes:

Johnny O
Mar 26th, 07, 7:19 PM
Here's one from a couple years ago...and yes, I did knock the camera down at the end!!:eek: My friend and his wife decided to drop by the garage and say hi, and it sorta messed up my video clip. But anyway, 3" exhaust, no crossover, Dynomax Ultra Flow ovals, turndowns at rear axle. Im not sure what cam was there at the time, there have been so many! I think it was 250/256 solid roller, 108LSA.

http://s58.photobucket.com/albums/g244/1johnnyo/?action=view&current=dynomaxnew.flv

frankf72malibu
Mar 26th, 07, 7:29 PM
Here is a recent one with my son and I and open headers. The American Thunder kit will be installed later this evening. I will ahve to repost after.
http://s153.photobucket.com/albums/s225/frankly25/?action=view&current=Pics128.flv
Frank

DOUG G
Mar 26th, 07, 7:41 PM
I'll have to get a new one with the new cam and head work. :D

Jcdubs
Mar 26th, 07, 8:50 PM
Not the greatest video but hear ya go, 355 ,10.5 to 1, Crower solid, American thunder 2.5: http://www.youtube.com/watch?v=oyxRAY9RLcU

Augustboy2009
Mar 26th, 07, 10:04 PM
As Flink69SS mentioned above, Heres my 496 with the Comp XE294 Cam
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=2014017643

And heres my old 396 with 702 closed chamber heads and a Comp Xtreme Marine 270H Cam. "Can you here the loose rocker arm"
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=1588660133
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=2017855324

Bummer, I had a clip of my 496 with the Voodoo 60204 but somehow it wouldn't play. Oh well.

kacp-o
Mar 26th, 07, 10:15 PM
Idle of my car in sig (http://video.tinypic.com/player.php?v=40p8y3b)

That's through the 2 1/2 exhaust with dronemasters and no crossover that is on the car now. Shortly to be a Pypes 3 inch with Street Pros (just ordered today...).

Rob

Steve69SS396
Mar 26th, 07, 10:22 PM
Hooker 1-3/4" headers with 3" Flowmaster 50 series.

http://thumbs.vidiac.com/ace46151-9dfc-42e2-826e-43f9bf0f3d50.jpg (http://videos.streetfire.net/video/ace46151-9dfc-42e2-826e-43f9bf0f3d50.htm)Click here to see Video (http://videos.streetfire.net/video/ace46151-9dfc-42e2-826e-43f9bf0f3d50.htm)

77 cruiser
Mar 26th, 07, 10:50 PM
Got one here, but it's in Quick Time sorry.

http://webpages.charter.net/77cruiser/100_0217.mov

camaroman7d
Mar 26th, 07, 11:50 PM
3" Exhaust with Borla mufflers, 1 3/4" headers. 388 cubic inches with 8-71 blower.

http://smg.photobucket.com/albums/v117/camaroman7d/?action=view&current=camaroman.flv

fast1971chevelle
Mar 27th, 07, 12:41 AM
383 c.i small block chevy 3 1/2 inch exhaust with dynomax bullet race mufflers
http://s128.photobucket.com/albums/p184/fast1971chevelle/?action=view&current=MPEG0001.flv

flink69SS
Mar 27th, 07, 12:22 PM
3 questions:

1) Do 3" pipes really emphasize the cam chop or do most of you just have very stout motors?

2) What are the louder types or flow masters? I have 40 series. Are the 50 series louder or American Thunder?

3) How much louder is a system that stops at the muffler or has very little pipe after?

Thanks Team...:thumbsup:

Augustboy2009
Mar 27th, 07, 2:13 PM
Check out the flowmaster website. They have sound clips that can give you a general idea of how their mufflers sound.

blown70
Mar 27th, 07, 3:01 PM
The video in my sig is 3" walker turbo's side exit...:angry: sounded like crap!I now have 3" flowmaster 40's dumped at the axle...Sounds less like crap-more like loud!:thumbsup:

Chevelle 6-71
Mar 27th, 07, 3:16 PM
Blown SBC - Ceramic Heddman headers, 3" stainless exhaust all the way back w/ Magnaflows, Pypes oval tips & DMH dumps ( 1st video closed / 2nd opened )

http://youtube.com/watch?v=_QouB1S0_w8

http://youtube.com/watch?v=eCp0cbG2uKM

Skeeveman
Mar 27th, 07, 5:22 PM
Here is one of my small block the last time I started it before I yanked it in favor of the big block. tree fiddy, sportsman II's, lunati .515" cam. The exhaust was full length 2.5", x-pipe, and v-force mufflers.

http://project71.net/skeeveman/2006-12-30/Last%20Start%20with%20SBC.avi

ejf87
Mar 27th, 07, 5:35 PM
heres my monte ss.I dont have a video walk around but have a race at the track.Moroso 4ft spiro flow.:thumbsup:

http://videos.streetfire.net/video/0ce76436-2b48-4e80-8cc8-98fd01015eda.htm

flink69SS
Mar 27th, 07, 11:29 PM
Blown SBC - Ceramic Heddman headers, 3" stainless exhaust all the way back w/ Magnaflows, Pypes oval tips & DMH dumps ( 1st video closed / 2nd opened )

http://youtube.com/watch?v=_QouB1S0_w8

http://youtube.com/watch?v=eCp0cbG2uKM

Sweet ride...

Keep Em coming...:hurray:

knudsonm
Mar 27th, 07, 11:39 PM
OK it's not a chevelle, but it's mine.

454BBC, Voodoo hyd roller, edelbrock heads, Victor Jr, 1.75" equal length headers, 3" collectors, 3" pipe to Dynomax Ultraflo SS mufflers dumped out the side in front of the rear tires.

http://s56.photobucket.com/albums/g163/slowride454/blazer%202006/?action=view&current=Slow_Ride---1.flv

http://i56.photobucket.com/albums/g163/slowride454/blazer%202006/blazerburnout1.jpg

Augustboy2009
Mar 28th, 07, 1:41 AM
You guys are making me drool! Awesome sounding cars. Now we just need to post some burn out pics! I'll try and get a video of me roastin the tires in my sleeper.

stroked78
Mar 28th, 07, 1:57 AM
heres some of my 400 open headers b4 the block cracked. the fotage was taken with my digital camera so the sound inst the best

http://media.putfile.com/startup-62
http://media.putfile.com/fresh-400

KAA
Mar 28th, 07, 2:23 AM
496, Ultradyne 288/296F10 cam, 3" X-pipe exhaust with 6" round Dynomax Ultra-Flows:

http://videos.streetfire.net/video/be1da274-e61b-4716-a511-98db00efd2eb.htm

http://media.putfile.com/El-Camino-Road-Course-Drive-By

Same as above except with a Flowmaster full 2.5" H-pipe exhaust system:

http://media.putfile.com/1970-El-Camino-SS-496

bb489
Mar 28th, 07, 8:17 AM
Exhaust vidoes in sig. These are 14" Georlich Xcellerator mufflers, no crossover.

1hot67
Mar 28th, 07, 11:05 AM
Here's mine:

http://www.fquick.com/videos/viewvideo.php?id=644

flink69SS
Mar 28th, 07, 12:17 PM
Here's mine:

http://www.fquick.com/videos/viewvideo.php?id=644

Michael- You are supposed to tell us what you have so we can know what sound cool or not...:thumbsup:

1hot67
Mar 28th, 07, 6:47 PM
Michael- You are supposed to tell us what you have so we can know what sound cool or not...:thumbsup:

496, XR294HR, hooker long tubes, torque-tech exhaust, flowmaster delta 50's

SoCalRat
Mar 29th, 07, 12:18 PM
Mike, Awesome looking 67. Is that Viper blue?

1hot67
Mar 29th, 07, 2:41 PM
Mike, Awesome looking 67. Is that Viper blue?

thanks Garry...it is a modified HOK true blue pearl.

Nicks406
Mar 29th, 07, 2:48 PM
90 Iroc, 355, TPIS ZZ9 cam, superram, hooker 2210 full length headers, custom 3" y-pipe and 3" catback with dynomax ultraflow welded oval, 20" case 3" single in, out.

http://s57.photobucket.com/albums/g219/nicksL98/?action=view&current=dynomax_idle.flv

Augustboy2009
Mar 29th, 07, 5:05 PM
Nicks406, dude that car sounds awesome.

Slick71ss
Mar 29th, 07, 5:40 PM
Can hear mine in the walk around vid in my sig.

Stock zz502 cam
Hooker super comps
Torque Tech 3" H-pipe exhaust
Pypes Violator mufflers

flink69SS
Mar 29th, 07, 6:01 PM
Can hear mine in the walk around vid in my sig.

Stock zz502 cam
Hooker super comps
Torque Tech 3" H-pipe exhaust
Pypes Violator mufflers

Phil- I now know what exhaust system I am getting....Yours sounds absolutely sick, perfect, friggen awsome...:D :beers: :D
What are the cam specs?

Frank

knudsonm
Mar 29th, 07, 6:10 PM
Phil- I now know what exhaust system I am getting....Yours sounds absolutely sick, perfect, friggen awsome...:D :beers: :D
What are the cam specs?

Frank

224/234 @ .050 .527/.544 lift on 110LSA

Slick71ss
Mar 29th, 07, 8:49 PM
224/234 @ .050 .527/.544 lift on 110LSA

What he said. It's the stock cam that comes in the zz502. I've thought about upgrading to a better cam, but just haven't been able to pull the trigger yet. I really like the Torque Tech exhaust and Violator mufflers. The Hooker super comps are nice but they hang a little too low. If I were going to change anything on the exhaust, it would be the headers.

1969ss396
Mar 29th, 07, 9:28 PM
496, Ultradyne 288/296F10 cam, 3" X-pipe exhaust with 6" round Dynomax Ultra-Flows:

http://videos.streetfire.net/video/be1da274-e61b-4716-a511-98db00efd2eb.htm

http://media.putfile.com/El-Camino-Road-Course-Drive-By

Same as above except with a Flowmaster full 2.5" H-pipe exhaust system:

http://media.putfile.com/1970-El-Camino-SS-496
That first video sounds unbelievable. Did you say 6" mufflers?

69-CHVL
Mar 29th, 07, 9:52 PM
3" Pypes w/X pipe and StreetPro muffs, this is a stock 454HO:

BTW - resonance intense!

http://s134.photobucket.com/albums/q116/VGIORDANO_2007/?action=view&current=Chevellestreetpro.flv

1969ss396
Mar 29th, 07, 9:56 PM
There is nothing-and I MEAN nothing that sounds better than a V8 with a big cam. I could listen to one idle all day. Who needs a radio?:cool:

Nicks406
Mar 30th, 07, 3:17 AM
Nicks406, dude that car sounds awesome.

Thanks! My Chevelle sounds even better!

OutCast
Mar 30th, 07, 7:34 AM
Here's mine:

http://www.fquick.com/videos/viewvideo.php?id=644

Very nice ride.

John

KAA
Mar 30th, 07, 12:37 PM
That first video sounds unbelievable. Did you say 6" mufflers? Yes, they're the 6" round welded Utra-Flos.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=WLK%2D17223&N=700+4294922710+400358+4294922711+4294906121+4294 791977+115&autoview=sku

jbird
Mar 30th, 07, 12:52 PM
Exhaust vidoes in sig. These are 14" Georlich Xcellerator mufflers, no crossover.

The best part of your video is when you pass by the drivers seat!:D

jbird
Mar 30th, 07, 12:53 PM
Yes, they're the 6" round welded Utra-Flos.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=WLK%2D17223&N=700+4294922710+400358+4294922711+4294906121+4294 791977+115&autoview=sku

It's hard to tell how loud they really are, but yours sounds a lot like my 3.5" bullets.

kjett
Mar 30th, 07, 12:58 PM
The best part of your video is when you pass by the drivers seat!:D

No doubt :D That must be the "hugher" orange I've heard so much about. Seriously, very clean looking machine and it sounds great. Love the burn out vid, too.

jbird
Mar 30th, 07, 1:21 PM
The burnout vid is a very good illustration of the need for chassis preload. Notice how the left tire mark is much darker than the right.

bracketchev1221
Mar 30th, 07, 5:29 PM
Sorry guys, I tried but it sounded too distorted. 2 1/4 primaries with 4" collector and no mufflers.

65INDAWRKS
Mar 30th, 07, 6:40 PM
There is nothing-and I MEAN nothing that sounds better than a V8 with a big cam. I could listen to one idle all day. Who needs a radio?:cool:

i totally agree, i recently put a engine in my 65 with a decent sized cam in it and i love every second i drive that car. LOVE IT! lol

Augustboy2009
Mar 30th, 07, 11:11 PM
Heres a small clip of an attemped burnout but it shifted into second to quick. I was holding the camera with my right hand so couldn't hold it in first for some huge roast action.
http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=2018797695

I'm not getting any power to my choke, so now I've got to fix the fuse. Had the choke hooked up to the wipers and now the wipers don't work. Going to find a better source of 12v power.

Johnny O
Mar 31st, 07, 8:53 AM
Had the choke hooked up to the wipers and now the wipers don't work.

So you could only start your car in the rain??;)

I dont see any video in the link.

flink69SS
Mar 31st, 07, 12:57 PM
We want more mufflers...:yes: :yes: :yes:

1badss396
Mar 31st, 07, 1:18 PM
Here is mine with gardner exhaust system on it.

1969 396/350 HP Video Clip (http://www.youtube.com/watch?v=ztKAJSoWrBI)

544 Lift
292 Duration
Race Prep Heads
3 Angle Valve job
Resurface heads
Bowl Blend
Set up for 219/1.88 Port Match
Keith Black Pistons
Hope that helps because I dont know squat about the internals of it, LOL

Augustboy2009
Mar 31st, 07, 1:40 PM
wow, that was cool, 1badss. Sounds awesome. Johnny 0, Myspace deleted my vid. i guess they don't want any burnout vids on their site. I'll try youtube.

1badss396
Mar 31st, 07, 3:37 PM
wow, that was cool, 1badss. Sounds awesome. Johnny 0, Myspace deleted my vid. i guess they don't want any burnout vids on their site. I'll try youtube.Youtube will take just about any thing..:D

flink69SS
Apr 13th, 07, 2:51 PM
TTT...Anyone Else???

Steven's 72
Apr 13th, 07, 3:32 PM
Here you go, Hope its to everyone's standard!

http://s6.photobucket.com/albums/y209/RODZSS/?action=view&current=72Chevelle-Cam-Exhaust.flv

frankf72malibu
Apr 13th, 07, 10:50 PM
I posted open headers earlier and now here is the Flowmaster American Thunder system. It sounds good!

http://s153.photobucket.com/albums/s225/frankly25/?action=view&current=Pics166.flv

Frank

flink69SS
Apr 14th, 07, 1:53 AM
I posted open headers earlier and now here is the Flowmaster American Thunder system. It sounds good!

http://s153.photobucket.com/albums/s225/frankly25/?action=view&current=Pics166.flv

Frank

Frank- 2 1/2 or 3" pipes?

Steve69SS396
Apr 14th, 07, 4:30 PM
This is a 454 with a Comp 276HR, Hooker 2-1/8 headers and some old 2-1/2" Flowmaster 50 series mufflers bolted to the collectors. Just something to keep from pissing the neighbors off until I finish the car and get it to the muffler shop.

http://thumbs.vidiac.com/2ec7720b-7fff-47f1-a190-019b946e015a.jpg (http://videos.streetfire.net/video/2ec7720b-7fff-47f1-a190-019b946e015a.htm)Click here to see Video (http://videos.streetfire.net/video/2ec7720b-7fff-47f1-a190-019b946e015a.htm)

rchevellea
Apr 14th, 07, 9:40 PM
Hey guys here are a couple videos of that car, sorry about the wind noise, its been bad here the last couple of days.

383 9.5 to 1 cr
234/244 at .50 487/508 112lsa
flowmaster 40's all the way out the back ( used to have them in front of the axle but it got old since i drive the car to and from school about and hour away everyday. now its great going 75 mph.

by the way eveyones car sounds awesome, i have enjoyed listening to them all on more than one occasion, hope ya'll enjoy mine:beers:


http://www.youtube.com/watch?v=8_Hn5DqyEcs


http://www.youtube.com/watch?v=ve-RQQLh40U

frankf72malibu
Apr 15th, 07, 1:23 AM
Frank- 2 1/2 or 3" pipes?

Flink,
2 1/2" pipes. I noticed that at the trans cross-member that a 3" would have hit. It fits really well with a few small cuts here and there. It is all bolted together for now but I plan on welding up a few spots later.
Frank

nolimitpkr
Apr 15th, 07, 7:28 PM
68 chevelle, 383, 3 inch exhaust, hooker aerochambers......

Love those sounds of American V8'S!!!!!!!!!!


http://videos.streetfire.net/video/3b26bbc6-9815-4b9b-b68f-991101242744.htm

marooned
Apr 15th, 07, 8:33 PM
You'll need to turn the sound up a little.


http://s52.photobucket.com/albums/g30/maroond/Exhaust%20sound/

It's just a Li'l ole smallblock. :yes:

flink69SS
May 18th, 07, 5:53 PM
Any have or know anything about the new FlowMaster 44 Series ?

dreis454
May 18th, 07, 6:14 PM
Any have or know anything about the new FlowMaster 44 Series ?
ya mean THESE?http://www.flowmastermufflers.com/s44.html

turn up the speakers:yes:

flink69SS
May 18th, 07, 6:23 PM
ya mean THESE?http://www.flowmastermufflers.com/s44.html

turn up the speakers:yes:
Is it just me or was that a crappy commercial for mufflers and a great commercial for BB Chevy Power?

mr 4 speed
May 18th, 07, 7:49 PM
Dan,was that your car ;) :D

Nice!!

MrBill66Malibu
May 18th, 07, 10:43 PM
Here's my 383 with solid roller and 40 series flowmasters

http://s71.photobucket.com/albums/i138/mrbill66malibu/?action=view&current=chevelle001.flv

4FTTY4
May 19th, 07, 4:59 PM
3 inch pipe to spintechs...

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoID=2018779813

flink69SS
May 19th, 07, 5:02 PM
3 inch pipe to spintechs...

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoID=2018779813

Nick- Awsome rumble under there. I have never heard of Spintechs before but I think I like them...:yes:

4FTTY4
May 19th, 07, 5:06 PM
and they absolutely scream when you get into it...

dreis454
May 20th, 07, 9:07 AM
Dan,was that your car ;) :D

Nice!!mine sounds closed ti that, but only looks that good from about 100 yards...............:D

flink69SS
Aug 10th, 07, 2:19 PM
Well it took me this long but here is what mine sounds like. I was actually shooting the new slicks on there but it sounds good too. Flowmaster 40 with 2 1/2" pipes.
Click on the video to hear...:yes:
http://i80.photobucket.com/albums/j173/flink69SS/th_000_1150.jpg (http://s80.photobucket.com/albums/j173/flink69SS/?action=view&current=000_1150.flv)

Bowtie-72
Aug 10th, 07, 2:33 PM
I gotta do a better vid, but here's mine. See sig for details. Flowtech Afterburner headers, 2-1/2" exhaust, box mufflers (like flo-pros)
http://i168.photobucket.com/albums/u165/Bowtie-Bry/th_7003.jpg (http://s168.photobucket.com/albums/u165/Bowtie-Bry/?action=view&current=7003.flv)

flink69SS
Aug 14th, 07, 6:02 PM
Anyone else running Spintechs???

Junkyard Dawg
Aug 16th, 07, 10:55 AM
Here's a few clips of mine:

http://i83.photobucket.com/albums/j312/djw69Nova/th_exhaustsounds001.jpg (http://s83.photobucket.com/albums/j312/djw69Nova/?action=view&current=exhaustsounds001.flv)

And here's what it sounds like on the outside.

http://i83.photobucket.com/albums/j312/djw69Nova/th_raceday1013.jpg (http://s83.photobucket.com/albums/j312/djw69Nova/?action=view&current=raceday1013.flv)



What I'm running is a pair of Dynomax Ultraflows, 2.5 inch inlet/outlet, offset...with the Flowmaster mandrel bent pipes for the 68-72 Chevelle. The exhaust comes from a pair of Summit long tube headers that bolt to a 396 big block with a Comp XE284 cam. The rear end gear is a 4.10 with a TH350 tranny and a Hughes 3000 stall converter.

Note my car doesn't sound like Flowmasters, IMO.

Jesse N.
Aug 16th, 07, 12:36 PM
My twin turbo 540 on the wheel dyno. In this video you can actually hear the exhaust over the turbos. 3.5'' mandrel bent with ultra flows, all the way out behind the tire with a 4'' tip.


http://www.youtube.com/watch?v=U6wY_m6dEPc

.GEARHEAD.
Aug 16th, 07, 3:09 PM
434 SBC, 1-7/8" headers, 3.5" exhaust through Borla XR-1's turned out in front of the rear tires.

http://videos.streetfire.net/video/154dcaf8-8914-4335-a7fc-991b0008cb0f.htm

http://videos.streetfire.net/video/d3ec3fe6-0a20-4c31-b079-991c016f1031.htm

408 SBC, 1-3/4" headers, 3" exhaust through an x-pipe with Borla XR-1's turned out at the axle.

http://rides.webshots.com/video/3014524990100104327FvoWGf?vhost=rides

Jim

cparsons
Aug 16th, 07, 3:26 PM
Here is a vid of my chevelle Idling...383 w/11:1 comp. comp xe284, edelbrock performer rpm heads with long tubes and flowmasters just a general rundown.

http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=11859827

MadMarv
Aug 16th, 07, 4:11 PM
hope this works..
older quicktime.. plus photobucket.. ugh

http://s225.photobucket.com/albums/dd280/MadMarv_album/?action=view&current=idleFeb152004.flv

461, 2" headers, 3.5" collectors, 3" exhaust, 20" dynomax hemi super turbos, full tails

at this time there was no x-pipe and I was using an UDHR4 camshaft.

12.7@112ish 2/ 2.25 60' (in that combo).

matt

LXS
Aug 16th, 07, 6:40 PM
Anyone else running Spintechs???


You asked for it, and now you've got it! :D Here's my '71 Chevelle that I video taped using my Motorola Sliver cell phone. It's a 391ci (but I usually call it a 388, it rolls off the tongue quite nicely LoL), it's got 9.5:1 C/R, .488" lift I/E, RPM intake, Holley 750VS carb, Bowtie heads, running thru Hedman 1 3/4" headers, muffler shop bent 2 1/2" x-pipe (and I do mean BENT!!! :mad: I'm planning on buying a mandrel bent X or modifying a Mac Prochamber! :thumbsup: ), and out thru a pair of Spin Tech mufflers! I don't recall which Spin Techs they are, but the muffler cases are roughly 9" long or so :confused: I hope you enjoy :)

http://i195.photobucket.com/albums/z129/LXS14/th_04-04-07_1451.jpg (http://s195.photobucket.com/albums/z129/LXS14/?action=view&current=04-04-07_1451.flv)http://i195.photobucket.com/albums/z129/LXS14/th_04-04-07_1450.jpg (http://s195.photobucket.com/albums/z129/LXS14/?action=view&current=04-04-07_1450.flv)


Oh yeah, that lil "whine" you hear is my Pete Jackson "Loud" gear drive! :D :thumbsup::beers:

bigjimzlll
Aug 16th, 07, 6:49 PM
mufflers????/
Click here to watch MOV00769-86 (http://media.putfile.com/MOV00769-86)

LXS
Aug 16th, 07, 7:10 PM
mufflers????/
Click here to watch MOV00769-86 (http://media.putfile.com/MOV00769-86)


What are you running? Engine size? Specs? Muffler brand? :)

LXS
Aug 16th, 07, 7:36 PM
My twin turbo 540 on the wheel dyno. In this video you can actually hear the exhaust over the turbos. 3.5'' mandrel bent with ultra flows, all the way out behind the tire with a 4'' tip.


http://www.youtube.com/watch?v=U6wY_m6dEPc


Man, I LOVED your car and video clip soo much that I HAD to leave a comment on you tube AND I posted your clip up on my myspace LoL :D:thumbsup:

bigjimzlll
Aug 16th, 07, 8:46 PM
What are you running? Engine size? Specs? Muffler brand? :)


A lewis racing engines 540..14-1 CR 850HP. I actually run spintechs now...just so I can load it on the trailer...dam neighbors...lol

LXS
Aug 16th, 07, 11:57 PM
A lewis racing engines 540..14-1 CR 850HP. I actually run spintechs now...just so I can load it on the trailer...dam neighbors...lol


LMFAO!!! :D :D :D

beano30
Aug 17th, 07, 6:26 PM
My 66 with a 402,mild cam, 750 Holly, 2 1/2 with flows factory exit.

http://videos.streetfire.net/video/309b378e-0c89-4082-adf5-998d011f78d8.htm

JOHN WILSON
Aug 18th, 07, 2:39 AM
2" primaries, 3.5" collector, 3.5" X-pipe, 3.5" Magnaflow's w/turndowns.


Click here to watch 200707281054461 (http://media.putfile.com/200707281054461)

HopkinsChevelle
Aug 18th, 07, 9:31 PM
Just made this one today


http://myspacetv.com/index.cfm?fuseaction=vids.individual&videoid=16142259

408 BBC Comp cam XE Solid 274. Summit headers. 3inch dynomax race bullets

LXS
Aug 19th, 07, 7:36 PM
Hey Enrique (Slowpoke), post up man!!! :D :thumbsup:

kirkwoodken
Aug 25th, 07, 4:12 AM
Here is the sound of UDHarold's 501C2LUN in a 406 SB. Muffler is stock Douglas crossflow. Sound is idling and against the brake. The gas in it is over a year old. Probably time for new gas and plugs. Rusty trailer hitch adds to nostalgia look. This is the car I use for towing my bike trailer.


http://www.youtube.com/watch?v=bPAI0SbtPjQ

cuisinartvette
Aug 25th, 07, 11:37 AM
Any more of you guys with the large case hemi turbos?

Keep the vids coming.

dscabra
Sep 14th, 07, 11:12 PM
Bringing back this old thread with a video of my 1970 El Camino.

http://www.youtube.com/watch?v=hTddPROrSoo

Dave

flink69SS
Sep 14th, 07, 11:15 PM
Bringing back this old thread with a video of my 1970 El Camino.

http://www.youtube.com/watch?v=hTddPROrSoo

Dave

Dave- You forgot the rules....What size pipes and what mufflers...That's the whole purpose of this awsome post...:thumbsup:

dscabra
Sep 14th, 07, 11:36 PM
Dave- You forgot the rules....What size pipes and what mufflers...That's the whole purpose of this awsome post...:thumbsup:

Factory manifolds (no headers), 2.5" pipes and Flowmaster 40 series mufflers.

Dave

gonracn
Sep 15th, 07, 12:08 AM
HO 502 2" headers 3" torque tech with super 40 flowmasters.

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&VideoID=12695213

frankf72malibu
Sep 15th, 07, 10:25 AM
HO 502 2" headers 3" torque tech with super 40 flowmasters.

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&VideoID=12695213

Russel,
Looks great and sounds awesome! Can't wait to see it at our next get together.
Frank

SebJr
Sep 15th, 07, 11:50 AM
I'm in the process of having my 69's exhaust changed from stock as we speak... it's got a Comp Cam XE 284 and putting a set of Dynomax Black jack -ceramic coated with 1-3/4 primaries to 3" collectors then a Pypes 3" X pipe to 3" race pro's with 2-1/2 " tails and stock tips:D
I can't wait to hear it.:hurray:

I'll be back with some sounds:yes: :thumbsup:

FRYNTYR
Sep 19th, 07, 11:23 PM
just a little ol 350.

http://s58.photobucket.com/albums/g274/roundyround/?action=view&current=MVI_0271.flv

flink69SS
Sep 19th, 07, 11:38 PM
just a little ol 350.

http://s58.photobucket.com/albums/g274/roundyround/?action=view&current=MVI_0271.flv

Dude, you're killing me...:cool:

Swyper
Sep 20th, 07, 12:08 AM
396, stock manifolds, 2.5" 40 series flowmasters

http://s192.photobucket.com/albums/z148/swyper_photos/?action=view&current=MVI_0889.flv

bigfredtn
Sep 20th, 07, 4:50 PM
Here is my 70 truck before I put mufflers on it.
http://s210.photobucket.com/albums/bb279/bigfredtn/?action=view&current=truckclip.flv

rchevellea
Sep 20th, 07, 5:09 PM
well i posted mine a while ago but i cut the tail pipes off just the other day, i will put the new...and improved one on here when i get a chance i think you guys will be pleasantly surprised. :hurray:

chris454ss1970
Sep 21st, 07, 2:58 AM
Well heres my little bit of noise. The combo is a 460 bbc with a solid roller cam, 3" exhaust through 4" dyno max bullets dumped at the axle. The quality of the video pretty much sucks but the sound is good. This was one of the first times to have my car out.

http://s39.photobucket.com/albums/e170/chris454ss1970/?action=view&current=03353b53.pbr

VinnyLSS572
Sep 21st, 07, 9:38 PM
Nothing like a big block with open exhaust

http://i135.photobucket.com/albums/q146/VINNYLSS572/th_Chevelle10.jpg (http://s135.photobucket.com/albums/q146/VINNYLSS572/?action=view&current=Chevelle10.flv)

dauber65
Nov 16th, 07, 2:34 PM
Well since my chevelle's 350 isn't too impressive sounding I thought I'd put my good friends Pete's TA on here because I LOVED the sound that LS1 was pounding out. PS~Its now twin turbo, so not big thumps, but way more impressive.

http://s94.photobucket.com/albums/l89/bowtieman81/Autocross/?action=view&current=MVI_0117.flv

In case you enjoyed that one, here is another one. I honestly have no idea what set up he had going at this time. However, this is him and his wife leaving the church after they just got MARRIED (in the church parking lot). He inspires me to maybe get married some day so I can do the same thing!

http://s94.photobucket.com/albums/l89/bowtieman81/Wedding%20-%20honeymoon/?action=view&current=P1000612.flv

zinithmora
Nov 16th, 07, 9:41 PM
ohh man i have to get in on this. we dont have a lot of videos of our cars but this one i have

ok so bear with me on this

64 true ss chevelle auto on floor with PS PB AC tack in dash clock on dash
its a 327 stock 202 heads .030 over 11.5 to 1 with a 520 solid roller i THINK its a 106 LS with turbo 350 3500 stall its got 3 inch with hooker areo chambers but the dumps were open with this video
this was the very 1st attempt to start a fresh motor (after it set for a year built) and it fired :P but timing may still be off but not by much it had 80+ lbs of oil the whole time :D

at the 1:16 mark is when i get goose bumps every time.

http://www.youtube.com/watch?v=pf3U9GLHY40

for those that care or want to know a small list of some of the cars we have

69 camaro conv z-28 clone 427 powerglide http://i175.photobucket.com/albums/w157/lawnchair_photos/566553435_l.jpg
67 chevelle ss clone 454/350 AC PB finished http://i175.photobucket.com/albums/w157/lawnchair_photos/Picture005.jpg
64 ss chevelle (video) project needs paint and int http://i175.photobucket.com/albums/w157/lawnchair_photos/Picture015.jpg http://i175.photobucket.com/albums/w157/lawnchair_photos/Picture022.jpg
69 chevelle 396/350 (the one i talk about in my posts) project needs 1/4s paint hood seats http://i175.photobucket.com/albums/w157/lawnchair_photos/smallpic.jpg
69 chevelle conv with 427/400 PB PS AC and its a true SS!!!! (not orig motor cause i know ima get flak later for it)dad was 2nd owner had since 72 needs paint
69 chevelle conv could be SS bone stock on rowtisary for frame off as of now
69 camaro true z-28 with 427/m-22 needs a rear end and paint
67 camaro SS/RS 396 375 with all options even rear window defog we have 17K+ in body work and kustomized original int need assembly
69 firebird formula 400 4speed needs sheet metal everywhere driven daily http://i175.photobucket.com/albums/w157/lawnchair_photos/othercrap037.jpg
67 camaro rs 302 auto trans trans runs and drives project
67 rs ss camaro with PS PB >>Power Windows<< its a POS with hardly anything more then a trimtag and doors http://i175.photobucket.com/albums/w157/lawnchair_photos/Picture041.jpg
74 cuda 340 but a 440 is about to go into it. compleate needs freshinging up and a paintjob
69 firebird conv small block auto compleat but rusty!!
55 new yorker HEMI perfect show car but never driven
58 new yorker 383 ?? magnum needs paint no rust
74 vette smallblock 4 speed needs brakes bumpers
69 camaro rs 302 cross ram no rust project runs and drives
and 4 garages / houses / storage units full of pieces and parts for GM cars and hemi parts
just sold last month..... 69 firebird conv 428 PS power disk breaks
and i know im leaveing out about 4 or 5 other cars but ohh well

Enjoy
Chuckles

zinithmora
Nov 16th, 07, 10:41 PM
hehehe ok posting brought up some memories of my 1st time driving... it was the 74 vette smallblock 4 speed i think i was like 6 or 7 years old... taped 2X4s to my feet so i could reach the peddles we got out on an open stretch of road and dad was like ok its ur turn now.... so i get into the drivers seat and dad get into the pass side....i can parly see over the steering wheel hes like ok before we start the car 1st gear is here and 2nds here ect explains what clutch break and gas peddle does....ect ect ect. i push in the clutch and start the car dads over there like ok now with the clutch in push it into 1st gear and give it a little gas and let out on the clutch..... hes like ok this is going to go REALLY fast now....as soon as you do that let off the gas push in on the clutch push into 2nd let out on clutch push on gas..... so im like ok gas....to the floor.....clutch out slide foot off to the side (and yes i didnt let out on the clutch i slide my foot off the peddle)...and good god here we were doing into the ditch and dad made no attempt to grab the wheel to correct he just kept calm yelling go left go left now change gears change gears!!!!!! push in on clutch let out on gas slid into 2nd push gas to the floor slide foot off to side of clutch then i started to not be able to see from all the smoke coming into the cab from the tires dad was like WAHOOOOOO beautiful shift but we have to get moving a little more to outrun the smoke push it into 3rd gas peddle shift peddle gas the car starts to drift the other way into the right side of the ditch...dads holding the OHH ***** handle YELLING GO RIGHT GO RIGHT WAAAAAHOOOOOOO SHIFT SHIFT SHIFT!!!!!!!!!!!! shift into 4th chirping the tires befor the hooked up and off down the road we went driving to the town and befor we get there hes like alright that was great no accidents but now i wanna show you a little trick to go faster.... and since we are going to be riding around in town we really shouldnt do what we just done. ok so were going to downshift to slow down push in clutch pull into neutral let out on clutch push in clutch pull into 3rd (double clutch downshift) did shame all the way to 1st. then went all the way back up to 4th (double clutch up shift) and by the time we made it to town i was a regular mario andretti ohh my god was that the funnest thing i have EVER did in my entire life and ever since iv been double clutch shifting and out running ricers in a cloud of white smoke

and the part that sticks out the most was not only was there not trans parts and rods laying all over the road but that he didnt yell at me or on top of that never once told me i was doing anything wrong or make any attempt to grab the wheel or the shifter

sorry such a long post but when i remembered that vette that memories came floating back into my mind of the blocks on my feet burning rubber in every gear and chirping them in 4th not even in school yet

scotty
Nov 17th, 07, 11:54 AM
350 LS1, twin turbos, full 3" torque tech exhaust, Dynomax welded 3" mufflers, 6900 rpm.:D



http://thumbs.vidiac.com/cf9abf52-2d33-4022-a7f7-99e6011c2bcb.jpg (http://lsx.streetfire.net/video/cf9abf52-2d33-4022-a7f7-99e6011c2bcb.htm)Click here to see Video (http://lsx.streetfire.net/video/cf9abf52-2d33-4022-a7f7-99e6011c2bcb.htm)

http://thumbs.vidiac.com/795d55a0-f5f0-400b-8d34-99dc0157baa1.jpg (http://lsx.streetfire.net/video/795d55a0-f5f0-400b-8d34-99dc0157baa1.htm)Click here to see Video (http://lsx.streetfire.net/video/795d55a0-f5f0-400b-8d34-99dc0157baa1.htm)

http://thumbs.vidiac.com/1aae1a24-3c41-4fec-a8a1-981e018124aa.jpg (http://lsx.streetfire.net/video/1aae1a24-3c41-4fec-a8a1-981e018124aa.htm)Click here to see Video (http://lsx.streetfire.net/video/1aae1a24-3c41-4fec-a8a1-981e018124aa.htm)

http://thumbs.vidiac.com/cff51b06-3df9-4894-be17-3251caa6e899.jpg (http://lsx.streetfire.net/video/cff51b06-3df9-4894-be17-3251caa6e899.htm)Click here to see Video (http://lsx.streetfire.net/video/cff51b06-3df9-4894-be17-3251caa6e899.htm)

TooLgasm
Nov 17th, 07, 1:11 PM
454, Comp 286H, Hooker full length headers, 3" Torque Tech, Flowmaster Super 40's, 3" tails.

http://www.youtube.com/watch?v=JNYhY4DJQ0Y

Highway Star
Nov 17th, 07, 6:57 PM
Here's mine; 355 with some goodies

http://www.youtube.com/watch?v=uTUZKE2m7ME

Raupleminze454
Nov 17th, 07, 11:07 PM
From the track when it was together............

http://youtube.com/watch?v=2UipymwnlcY

scotty
Nov 17th, 07, 11:21 PM
Look at my video above, looks like we were racing the same car, same track, same lanes, same night. That is wierd...


From the track when it was together............

http://youtube.com/watch?v=2UipymwnlcY

396-325hp
Dec 6th, 07, 12:44 PM
Very Nice!!

3" Pypes w/X pipe and StreetPro muffs, this is a stock 454HO:

BTW - resonance intense!

http://s134.photobucket.com/albums/q116/VGIORDANO_2007/?action=view&current=Chevellestreetpro.flv

gearjammerexpress
Dec 6th, 07, 2:28 PM
here is my xr1 3.5" borla's, during its project stage I need to make a good cause I was just test my wifes new camara


http://i49.photobucket.com/albums/f276/gearjammerexpress/th_X072NOVA.jpg (http://s49.photobucket.com/albums/f276/gearjammerexpress/?action=view&current=X072NOVA.flv)

flink69SS
Dec 6th, 07, 2:41 PM
here is my xr1 3.5" borla's, during its project stage I need to make a good cause I was just test my wifes new camara


http://i49.photobucket.com/albums/f276/gearjammerexpress/th_X072NOVA.jpg (http://s49.photobucket.com/albums/f276/gearjammerexpress/?action=view&current=X072NOVA.flv)

Phil- That thing sounds wicked...:thumbsup:
How about a few specs on the cam, compression and all other good numbers. I see you have a Team G on there. I had just swapped my team G for an RPM intake to get better 60' times and was wondering what you think of the Team G.

tmino
Dec 10th, 07, 1:42 PM
Here's mine

http://youtube.com/watch?v=94CqvXaL7Io

Augustboy2009
Dec 10th, 07, 2:57 PM
I love this thread!

D Stroud
Dec 10th, 07, 3:26 PM
454 bored .030 over
781 heads fitted with larger valves
Voodoo 60204 Hyd Cam 276/284 .554/.572
Edlebrock Air Gap
Holley 870 Street Avenger Carb
1-3/4" headers
3" exhaust with Ultra-Flo's and 3" tails with "X"


http://www.youtube.com/watch?v=mFcqhTQ017s

Chris Stanwyck
Jan 14th, 08, 11:20 AM
See signature,
finally figured out how to move videos around.

jester1
Jan 14th, 08, 1:26 PM
See signature,
finally figured out how to move videos around.

Chris your car looks really familiar, do you ever cruise in the woodbridge/maple shows?

Chris Stanwyck
Jan 14th, 08, 1:56 PM
Been a few times a couple years back at the woodbridge cruise (pine valley / #7). Allotta heat (police) lately.
Know many fast car enthusiasts in the GTA (mostly vettes & velles).
Travelled north of there a few times after the show for the real show.....if ya know what I mean. What a blast.

gearjammerexpress
Jan 14th, 08, 2:22 PM
Frank flink69ss here are some specs on the current set up, I say current cause it's about to change in the near future.

454 + .030 = 460 Cubic Inch
4" steel crank
6.135" Steel rods
TRW12.5:1 closed chamber pistons (coupled w/ 101cc 063 head)
Scotty Brown custom ground soild camshaft
cam lift - 636/595
cam duration - 259/266 installed at 108
Solid lifter w/ EDM oiling holes
Rollmaster roller chain and gear
"STOCK" 063 closed chamber large Oval port heads w/ small valves
Team G Intake
Proform 850 race carb
Performance Distributors HEI

Trans - Hutch Glide

D/Shaft - Alum.

Rear End - 9" w/ 35 spline Moser axles spool, "N" case, 4.57 ring n pinion

Rear Suspension - Anri Roll Bar, Calvert split Monos, caltarcs, rancho 9000 shocks

Front Suspension - Low friction ball joints, low friction upper / lower bushings, Moroso trick springs, lakewood 90/10 shocks

Chassis - 12 point cage w/ swingout door bars, CE weld in fames connectors w/ spring pockets.

I can give you this performance update but I will tell you its not accurate due to a fuel starvation problem and no adjustments to the chassis or suspension as of yet.

60' - 1.57
shift point - 6300 rpm about 200' short of the 1/8th then the car laid down out of gas
1/8 - 7.22 @ 95.36 mph (out of gas)
1/4 - 12.26 @ 74.65 mph

So we are hopping for some low 11's out of it this spring Lord willing.

blue66
Jan 14th, 08, 2:50 PM
here is my xr1 3.5" borla's, during its project stage I need to make a good cause I was just test my wifes new camara


[

Is this with any crossover? Or tailpipes, or do you have them dumped B4 the axle?

Sounds nice :thumbsup:

gearjammerexpress
Jan 14th, 08, 5:30 PM
Is this with any crossover? Or tailpipes, or do you have them dumped B4 the axle?

Sounds nice :thumbsup:


Right before the axle

http://i49.photobucket.com/albums/f276/gearjammerexpress/X072Nova008.jpg

http://i49.photobucket.com/albums/f276/gearjammerexpress/X072062.jpg

They sound a whole lot better in person, I will try to find someone with a better camara

Thanks

LS_5
Jan 14th, 08, 7:03 PM
Here's the dyno video from last summer:

http://www.youtube.com/watch?v=fv_7FiZ2tuI

#'s matching 454 with a mild solid roller, full 3" exhaust, X pipe, Pypes Race Pro's, Stainless works system and Headers (2" primaries).

We only let them go to 6000. Didn't want to damage anything. Also didn't want to risk doing anything more to the motor since it's original to the car, so it's being shelved. The motor has been pulled and is being replaced with a Wolfplace 540 this spring. We'll be back to the dyno late next summer!

BlueSS454
Jan 14th, 08, 7:16 PM
Not the best quality video, but the sound is there....

http://smg.photobucket.com/albums/v249/BlueSS454/70%20SS/?action=view&current=MOV05442.flv

Flowmaster American Thunder 2.5" with 40 series mufflers, Dynomax headers with 1 7/8 primaries.

454 + .030, Holley 3310, Edlebrock RPM intake, Crane Powermax hydraulic .534/.553 & 286/296

flink69SS
Jan 14th, 08, 7:18 PM
13,000+ Views and going......SWEEET...:D

Skeeveman
Jan 14th, 08, 7:35 PM
I posted on the first page of this thread, but that was of the small block with the 2.5" pipes and V-Force mufflers. Here is what it is now with the 3.5" pipes and Spintechs.

I should actually update the clip, as I think they have started to sound even better with time.

http://youtube.com/watch?v=Uf1KhjJA6OQ

355_nova
Jan 20th, 08, 7:41 PM
Finnaly got it down loaded and I sure wish it was the same temp now as in the picture.
68 Bu 468 10.1 comp. 103072 Crane Hyd. cam 2 7/8 headers 2.5" exh. with x-pipe and hooker areo chambers 3" tail pipe. It's a mellow tone while crusing around but when you get on it they can hear me at home. :D Small town of 2500.
http://s254.photobucket.com/albums/hh110/6870chev/?action=view&current=14d14e34.flv

Teufelhunden
Jan 21st, 08, 1:51 AM
I suppose I should add what I have.

http://www.youtube.com/watch?v=aqQ45pRtGtk

64malss468
Jan 27th, 08, 5:29 PM
had to bring this one back now that i have a short vid. comp 286 magnum cam 10 to 1 781's........http://youtube.com/watch?v=MtMYoYoFRxo

HerrKooled
Feb 4th, 08, 1:12 AM
open headers :thumbsup:

kivaka
Feb 4th, 08, 1:36 AM
230 inline 6 with stock manifoild spit off to glass pax then stock tail pipe. cold start

http://www.youtube.com/watch?v=ybZsHboFEMA

Augustboy2009
Feb 4th, 08, 1:40 AM
230 inline 6 with stock manifoild spit off to glass pax then stock tail pipe. cold start

http://www.youtube.com/watch?v=ybZsHboFEMA

dang, that 6 sounds mean. cool

kivaka
Feb 4th, 08, 1:47 AM
thanks bob it sounds better once its warmer, but im digging the '50 Series Delta Flow" for my 327 now that i found out you can hear somewhat of how they would sound on there site. so many nice sounding rides on this site

kivaka
Feb 4th, 08, 1:50 AM
this is strail pipes they didnt put the mufflers on. my friend adam made the SS headers and sorry that the sound is off but im pretty sure you can guess what the car can do http://www.youtube.com/watch?v=n2xadLIL74Q

trmnatr
Feb 4th, 08, 1:51 AM
Kivaka

I can send you a video of what hooker aero chambers sound like if you want? And mine is a 327 too, high compression but still same cid

kivaka
Feb 4th, 08, 1:53 AM
for sure that would rock butch,

trmnatr
Feb 4th, 08, 1:57 AM
Give me about 5min, must switch over to the other computer account where i keep all the movies/photo's

kivaka
Feb 4th, 08, 2:02 AM
right on take your time me and jessica sat for about 30 min looking on you tube for a nice sound, we both like the deep classic sounds so far and i want to stay away from the import sounds

trmnatr
Feb 4th, 08, 2:07 AM
Its coming over to you along with another one im sending now which was just a ride around the block

trmnatr
Feb 4th, 08, 2:16 AM
You have mail, At idle some people love the way it sounds but some people dont, alot of the idle you hear is from such a large cam in a small engine. W.O.T it sounds great and under acceleration and cruise

kivaka
Feb 4th, 08, 2:16 AM
right on thats a nice sound coming out of that car. i think you tube is updating there site wont let me upload them il try in a few mins.

trmnatr
Feb 4th, 08, 2:17 AM
They are 3" hooker aero chamber mufflers with offset inlet/ offset outlet in stock location, i used the flowmaster pipe kit, fits great

kivaka
Feb 4th, 08, 2:19 AM
the one at night sounds great when your about 20 yards out you can hear your car over the other one

trmnatr
Feb 4th, 08, 2:24 AM
A video of the car i like is coming over to you, wish my car ran like that one that i just sent you :cool:

trmnatr
Feb 4th, 08, 2:25 AM
The hooker aero chambers in my opinion are somewhat quiet with a flowmaster type idle tone but when you jump in it w.o.t they dont have the echo tone, they are more agressive sounding i think would be the best way to describe them

MrBill66Malibu
Feb 4th, 08, 7:32 AM
Here you go, 385 w/solid roller http://s71.photobucket.com/albums/i138/mrbill66malibu/?action=view&current=Chevellefinishedmusicvideo.flv

Pavement Pounder
Feb 4th, 08, 8:27 PM
Heres mine at idle mostly stock http://i18.photobucket.com/albums/b101/poneypowered/th_047.jpg (http://s18.photobucket.com/albums/b101/poneypowered/?action=view&current=047.flv)

flink69SS
Mar 6th, 08, 1:29 PM
Someone was asking how Pypes sounded so I brought this post back to life.

mad70ss
Mar 20th, 08, 1:41 AM
anyone running 3" Xpipe with FM or MF?? do you guys that raspy sound?? trying to get a good deep sound out of my exhaust, but the x pipe made it raspy :sad:

Jebchevelle
Mar 20th, 08, 1:59 AM
There is nothing-and I MEAN nothing that sounds better than a V8 with a big cam. I could listen to one idle all day. Who needs a radio?:cool:

Aperantly me lol the guys in my local club rag on me cause I put a cd mp3 player and an amp and six speakers in my 66. its a race car with street appeal lol I even installed two glasspacks inline with the flowmaster 1000hp mufflers just so I could hear the radio lol.

curley8788
Mar 21st, 08, 12:21 AM
anyone running 3" Xpipe with FM or MF?? do you guys that raspy sound?? trying to get a good deep sound out of my exhaust, but the x pipe made it raspy :sad:

heres my 327 with a voodoo 60104 cam, 2 1/2 inch exhaust with an x pipe and flowmaster 40s:

http://s245.photobucket.com/albums/gg73/chevelle8868/?action=view&current=chevelleidle327.flv


that was a slow rev to 3000 rpm. it sounds like a nascar stock car at 6000 rpm:D

aaronz28
Mar 21st, 08, 9:32 PM
OK, not a Chevelle, but still a bowtie.

All stock 1969 numbers matching z28
11 to 1 302, stock 186 camel hump heads,
duntov 30-30
manifolds, Garder chambered exhaust

no xpipe.
i wish it wasn't so restrictive, becasue I love the sound, but performance is really down with this setup..

YouTube - Aaron's 1969 Z28 camaro idle

VinnyLSS572
Mar 21st, 08, 10:17 PM
My 69 Camaro

http://i135.photobucket.com/albums/q146/VINNYLSS572/th_69CAMAROSTARTUP-1.jpg (http://s135.photobucket.com/albums/q146/VINNYLSS572/?action=view&current=69CAMAROSTARTUP-1.flv)

Vinny

Yelcamino
Mar 27th, 08, 7:58 AM
Here's mine... Stahl headers, X pipe, Spin Tech mufflers, tail pipes all the way out.

http://i263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/th_468withfullexhaust.jpg (http://s263.photobucket.com/albums/ii131/hlumpp/Chevelle/454/?action=view&current=468withfullexhaust.flv)

flink69SS
Apr 3rd, 08, 4:37 PM
Remember, this is a post about exhaust so give us all the details...Size, mufflers, where they dump and we all love the cam specs that give that FAT chop...:thumbsup:

Chris Stanwyck
Apr 4th, 08, 9:51 AM
3", xpipes, manual cutoff, Borla XR1's, 3" Pypes tails, hookers 2" to 3.5.
540, solid roller.

Long video, move ahead to latter part of video as it was cold out and it took time to warm before I could drive off.

http://i140.photobucket.com/albums/r29/Jutskin/th_20071118124404.jpg (http://s140.photobucket.com/albums/r29/Jutskin/?action=view&current=20071118124404.flv)

496malibu
Apr 4th, 08, 8:09 PM
454 solid roller 8.1 compression, magnaflow race mufflers 3.5 inch right off collector.

YouTube - malibu

flink69SS
Jun 13th, 08, 2:04 PM
Ttt...:d

chevy kevy
Jun 13th, 08, 3:54 PM
PYPES 2.5" X-PIPE with RACE PROS system, SB 350, Headers
http://www.youtube.com/CHEVYKEVYSS
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/zG2Jl5nztt4&hl=en"></param><embed src="http://www.youtube.com/v/zG2Jl5nztt4&hl=en" type="application/x-shockwave-flash" width="425" height="344"></embed></object>

69SSpost
Sep 30th, 08, 9:48 PM
Im bringing this post back to life because i cant make up my mind on mufflers,I'm really like the dynomax ultra flows and spintechs,hopfully more of you guys post some clips .........

DONTWANT2
Oct 14th, 08, 2:38 PM
I dont have a vidieo yet but comp cam XE into Hooker ceramic headers with V Force mufflers. I think they have that deep throaty sound.....

jimmyballpeen
Nov 8th, 08, 8:17 AM
How about a 1 3/4 header into a 3" with some ultraflos that dumps before or after the rear axle. X or H pipe or straight. Anybody?

jaywill
Nov 8th, 08, 8:44 PM
here's my 402bb w/3" 1-chamber flows
http://i261.photobucket.com/albums/ii43/jaywill148/th_rnningoutside.jpg (http://s261.photobucket.com/albums/ii43/jaywill148/?action=view&current=rnningoutside.flv)

here it is with 3" summit fully welded mufflers
http://i261.photobucket.com/albums/ii43/jaywill148/th_3summitfullyweldedmufflers.jpg (http://s261.photobucket.com/albums/ii43/jaywill148/?action=view&current=3summitfullyweldedmufflers.flv)

mls48341
Nov 8th, 08, 9:35 PM
565 Chevy, 4" Sprint car style short muffler and downturns.

http://s162.photobucket.com/albums/t280/CollinsAutomotive/?action=view&current=MarkSmithALLMotor.flv

cuisinartvette
Nov 8th, 08, 10:19 PM
Found what I wanted today, heard it on a wagon with a cammed stroker same year. mandrl bent pipes, longtubes, X pipe and large (huge) case dynomax with exh all the wayout the back. No resonance, quiet yet as the rpms go up has a clean note with a little crackle to it, perfect for stealth mode and can drive it for hours without going deaf. :beers:

jaywill
Nov 8th, 08, 11:25 PM
565 Chevy, 4" Sprint car style short muffler and downturns.

http://s162.photobucket.com/albums/t280/CollinsAutomotive/?action=view&current=MarkSmithALLMotor.flv


KILLA!!!:thumbsup::thumbsup::thumbsup:

LS_5
Nov 9th, 08, 10:12 AM
I posted last January with a vid from summer, 07. Since then the motor has been replaced. It's now a 555 solid roller (built by Mike Lewis), 269/276 @ .050, .740/.711 lift and 111 lsa, afr 335's. It made 791 hp fwhp on his dyno.

This is a Dyno Jet chassis dyno vid we did here. It made just over 600 hp at the wheels at 5000 when the operator stopped graphing when max tq was reached. It was still climbing, though. It made peak hp at about 7000 on Mike's engine dyno. Discovered after the fact that we had a burned plug wire. So we figure it'd make about 650, or so, at the wheels.

Same exhaust system. 2" primaries/3" collectors (slip on) Full 3" system with electric dumps, X pipe and Pypes Race Pro mufflers.

1st pull is with the dumps closed, 2nd is with them open. Don't get the full effect since the video was shot from the front at about 20'. Son, Mike, is driving. Sounds best with the sound all the way up! :D

YouTube - '70 chevelle dyno

fridgeguy
Nov 9th, 08, 11:44 AM
This is my current 406 with Ultra Flows
3" mandral pipes.


http://i216.photobucket.com/player.swf?file=http://vid216.photobucket.com/albums/cc49/Fridgeguy/MVI_3480.flv">

396-325hp
Nov 12th, 08, 2:31 PM
I posted last January with a vid from summer, 07. Since then the motor has been replaced. It's now a 555 solid roller (built by Mike Lewis), 269/276 @ .050, .740/.711 lift and 111 lsa, afr 335's. It made 791 hp fwhp on his dyno.

This is a Dyno Jet chassis dyno vid we did here. It made just over 600 hp at the wheels at 5000 when the operator stopped graphing when max tq was reached. It was still climbing, though. It made peak hp at about 7000 on Mike's engine dyno. Discovered after the fact that we had a burned plug wire. So we figure it'd make about 650, or so, at the wheels.

Same exhaust system. 2" primaries/3" collectors (slip on) Full 3" system with electric dumps, X pipe and Pypes Race Pro mufflers.

1st pull is with the dumps closed, 2nd is with them open. Don't get the full effect since the video was shot from the front at about 20'. Son, Mike, is driving. Sounds best with the sound all the way up! :D

YouTube - '70 chevelle dyno (http://www.youtube.com/watch?v=rn57BHqDmlw)
Sounds awesome! Is this a Pypes exhaust kit or just the mufflers?

LS_5
Nov 12th, 08, 6:16 PM
Sounds awesome! Is this a Pypes exhaust kit or just the mufflers?

Thanks! It's a long story but it's a combination of mfg'ers.

Headers - Stainless Works
Electric dumps - Quick Time Performance
X Pipe - Pypes
Mufflers - Pypes Race Pros (14")
Tails - Stainless Works (custom).

Stainless Works also made exhaust extensions for the dumps so the paint on the underside of the car doesn't get burned.

Southern72
Nov 12th, 08, 8:01 PM
3" with super 44's full tails.

http://s259.photobucket.com/albums/hh284/jamisonhes/?action=view&current=pics1824.flv

cmt454
Nov 12th, 08, 8:24 PM
I posted last January with a vid from summer, 07. Since then the motor has been replaced. It's now a 555 solid roller (built by Mike Lewis), 269/276 @ .050, .740/.711 lift and 111 lsa, afr 335's. It made 791 hp fwhp on his dyno.

This is a Dyno Jet chassis dyno vid we did here. It made just over 600 hp at the wheels at 5000 when the operator stopped graphing when max tq was reached. It was still climbing, though. It made peak hp at about 7000 on Mike's engine dyno. Discovered after the fact that we had a burned plug wire. So we figure it'd make about 650, or so, at the wheels.

Same exhaust system. 2" primaries/3" collectors (slip on) Full 3" system with electric dumps, X pipe and Pypes Race Pro mufflers.

1st pull is with the dumps closed, 2nd is with them open. Don't get the full effect since the video was shot from the front at about 20'. Son, Mike, is driving. Sounds best with the sound all the way up! :D

YouTube - '70 chevelle dyno (http://www.youtube.com/watch?v=rn57BHqDmlw)

Andy, that sounds awesome! :thumbsup:

LS_5
Nov 13th, 08, 9:22 AM
Andy, that sounds awesome! :thumbsup:

Thanks, Chris!

fabio
Jan 13th, 09, 12:24 PM
check my sig for the video, 355 vortecs with air gap, 650 dp, 2.5" pypes x pipe with summit turbos dumped before axle that have the ends angled out.

I have to keep an eye on my dog in that video, he likes to piss on my rims. LOL

BowtieAaron
Jan 13th, 09, 7:35 PM
current motor..
355 10:1cr, brodix ik 180 heads, voodoo hyd roller 60122, dynomax 1 5/8 headers, jegs x pipe, moroso race mufflers, flowmaster tail pipes...

http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_Picture007.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=Picture007.flv)

http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_Picture002.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=Picture002.flv)


old motor..
350, 461 camel hump heads, xe268 cam ( starting to wipe a lobe), same exhaust as above..
http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_350xe268blown.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=350xe268blown.flv)

old 350 as one right above it, but with 336 heads, same came, but muffler shop 2.5 dual exhaust, summit turbo mufflers..
http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_soundclip.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=soundclip.flv)


aaron

vegadan
Jan 13th, 09, 8:47 PM
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i183.photobucket.com/player.swf?file=http://vid183.photobucket.com/albums/x193/vegadan/65%20chevelle/vidio002.flv">

vegadan
Jan 13th, 09, 8:53 PM
383,afr heads,vic jr,isky solid flat cam and stuff <embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i183.photobucket.com/player.swf?file=http://vid183.photobucket.com/albums/x193/vegadan/65%20chevelle/vidio002.flv">

andrew T
Jan 13th, 09, 11:55 PM
current motor..
355 10:1cr, brodix ik 180 heads, voodoo hyd roller 60122, dynomax 1 5/8 headers, jegs x pipe, moroso race mufflers, flowmaster tail pipes...

http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_Picture007.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=Picture007.flv)

http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_Picture002.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=Picture002.flv)


old motor..
350, 461 camel hump heads, xe268 cam ( starting to wipe a lobe), same exhaust as above..
http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_350xe268blown.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=350xe268blown.flv)

old 350 as one right above it, but with 336 heads, same came, but muffler shop 2.5 dual exhaust, summit turbo mufflers..
http://i28.photobucket.com/albums/c209/ssclonelq9/Videos/th_soundclip.jpg (http://s28.photobucket.com/albums/c209/ssclonelq9/Videos/?action=view&current=soundclip.flv)


aaron

Aaron

your car is surprisingly quiet for a car with race mufflers

SS402
Jan 14th, 09, 12:06 AM
here's the 402 doing what it likes best..
http://i246.photobucket.com/albums/gg104/mad-dog9659/th_4ac5fdc4.jpg (http://s246.photobucket.com/albums/gg104/mad-dog9659/?action=view&current=4ac5fdc4.pbr)

BowtieAaron
Jan 14th, 09, 12:28 AM
its the x pipe i believe..
also think its the camera.. it is quite loud while driving.. but inside, it is real quiet. i live it..
maybe its the 2.5" exhaust.. or the tail pipes.. i dunno.. but its getting a pair of cutouts so it will be loud...


aaron

bdc1013
Jan 14th, 09, 5:29 AM
YouTube - Summit Turbo Mufflers 71 Chevelle

71 chevelle. 383 stroker 3 inch exhuast with summit turbo muffs, yeah the $18 ones

andrew T
Jan 14th, 09, 9:50 AM
its the x pipe i believe..
also think its the camera.. it is quite loud while driving.. but inside, it is real quiet. i live it..
maybe its the 2.5" exhaust.. or the tail pipes.. i dunno.. but its getting a pair of cutouts so it will be loud...


aaron

I see you had the car on the dyno?

how much did it make if you don't mind me asking? Joe Sherman of Joe Sherman racing engines said on another forum that those moroso mufflers are the old "auger" style, are terrible for flow and took 100hp off an engine he had them on:confused:

Also, do they sound like straight thru's? or glasspacks? and do they drone? I was thinking of getting a pair for my ride with an x pipe as well

BowtieAaron
Jan 14th, 09, 5:22 PM
it made 303whp/335wtq on a dynojet in 75ish degree air.
it still needs much tuning, so it shouldn't have an issue making 350whp..

yes its an auger style muffler. to me it sounds different then any muffler. not as loud as a dynomax bullet. there is zero drone inside, which is why i love them, maybe its the xpipe, but i can cruise hold a conversation at 65mph (at over 3k) with the radio on, and i have no sound deadening.

im trying to get a pair of my friends spintecs to try out...

aaron

cuisinartvette
Jan 14th, 09, 5:34 PM
What is an auger style muffler?

GK-66SS
Jan 14th, 09, 6:03 PM
My 66 SS396 Convertible. Try to ignore the conure birds screeching in the background. They hate the car !

YouTube - 1966 Chevelle

BowtieAaron
Jan 14th, 09, 7:38 PM
this is the moroso spiral flow...

http://www.moroso.com/catalog/images/94050_group.jpg

aaron

71BBB
Jan 14th, 09, 8:21 PM
Just a little Buick motor with full length headers 2.5 custom mandrel bent system with flowmasters and all the comforts of a Buick
YouTube - 71 Buick Skylark walk around with 462CI

andrew T
Jan 14th, 09, 8:29 PM
it made 303whp/335wtq on a dynojet in 75ish degree air.
it still needs much tuning, so it shouldn't have an issue making 350whp..

yes its an auger style muffler. to me it sounds different then any muffler. not as loud as a dynomax bullet. there is zero drone inside, which is why i love them, maybe its the xpipe, but i can cruise hold a conversation at 65mph (at over 3k) with the radio on, and i have no sound deadening.

im trying to get a pair of my friends spintecs to try out...

aaron

Like you said, I think you could get more power out of that setup then you did.

What kind of spintechs does your friend have? and if you don't mind, how would you describe the sound of those spiral flows? deep like a flowmaster? or raspy? also how big are you headers and exhaust?

If you have free access to that dyno ( assumin here:D) I would try running your car with those spintechs, without any mufflers and with the spiral flows as well. Like I said before Joe Sherman says those morosos ate 100hp off one of his engines (seems a bit extreme though).

BowtieAaron
Jan 15th, 09, 12:17 AM
100hp is a lot. i highly doubt its 100hp.
i dont have free access to dyno, so no dyno time, unless i do some other serious mods and want to see difference.
i dont remember what spintechs my friend has, they were on his 5.0 mustang, and sounded awesome with the E303 cam, some form of street mufflers..

moroso has a race car, raspy kind of, kind of deep sound to it. but i think a lot has to do with the xpipe.

headers are 1 5/8 dynomax 3" collector, to a 3 to 2.5 flowmaster slip reducer collector, to 2.5" jegs xpipe, to 2.5 moroso mufflers to 2.5" flowmaster tail pipes. all mandrel bent. im going to throw some cut outs on it this winter i hope, if i can get the funds too. so we will see.. if i can get mufflers.. ill swap them out at the track ( i run all band clamps on the entire thing).


aaron

andrew T
Jan 15th, 09, 11:32 AM
100hp is a lot. i highly doubt its 100hp.
i dont have free access to dyno, so no dyno time, unless i do some other serious mods and want to see difference.
i dont remember what spintechs my friend has, they were on his 5.0 mustang, and sounded awesome with the E303 cam, some form of street mufflers..

moroso has a race car, raspy kind of, kind of deep sound to it. but i think a lot has to do with the xpipe.

headers are 1 5/8 dynomax 3" collector, to a 3 to 2.5 flowmaster slip reducer collector, to 2.5" jegs xpipe, to 2.5 moroso mufflers to 2.5" flowmaster tail pipes. all mandrel bent. im going to throw some cut outs on it this winter i hope, if i can get the funds too. so we will see.. if i can get mufflers.. ill swap them out at the track ( i run all band clamps on the entire thing).


aaron

Ya I agree, 100hp is quiteee a bit to lose from mufflers.

Well your description sounds about right, I am thinking of putting either those or violators on my car. But I really like the deepness of the morosos ( I am a bass player:D)

Looking forward to your track comparison

bowtie468
Jan 15th, 09, 12:46 PM
My T/A with a 468 BBC, 2" Hooker Super Comps 3" exhaust with "H" pipe and Flowmaster delta 40's
http://i266.photobucket.com/albums/ii269/wineo468/videos/th_HPIM1863.jpg (http://s266.photobucket.com/albums/ii269/wineo468/videos/?action=view&current=HPIM1863.flv)
My 71 vega with a 468BBC 2.125" Hooker super comps
http://i266.photobucket.com/albums/ii269/wineo468/videos/th_HPIM2380.jpg (http://s266.photobucket.com/albums/ii269/wineo468/videos/?action=view&current=HPIM2380.flv)

69SSpost
Jan 15th, 09, 6:15 PM
what kind of muffs on the vega?

Sinister
Jan 19th, 09, 10:28 PM
Okay. I tried several times to video my car with the laptop. Everytime I did it there was no sound. Except of course the test video. So here is a lousy video of the car but at least you now know what the beast looks and sounds like. Can't wait to finally get the rear end in this thing and take it for a drive. I am proud that it starts right up since it is in the 20 degree range here.

http://s447.photobucket.com/albums/qq191/delbertmarriott/?action=view&current=Movie25.flv

My first video post. Hope it works. :hurray:

Mwilson408
Jan 19th, 09, 10:42 PM
My 408 with Magnaflo Knockoffs:
http://i282.photobucket.com/albums/kk266/mwilsonmetalroof/th_MOV02203.jpg (http://s282.photobucket.com/albums/kk266/mwilsonmetalroof/?action=view&current=MOV02203.flv)

383 with magnaflo knockoffs:
http://i101.photobucket.com/albums/m53/Fast72SS/th_MOV02152.jpg (http://s101.photobucket.com/albums/m53/Fast72SS/?action=view&current=MOV02152.flv)

Sinister
Jan 19th, 09, 10:44 PM
Strange....the sound was playing but on photobucket it plays. Anyways, this is a better video of my son Jake and I freezing at 11pm yesterday to video the car and the sound. The car is filthy but doesn't look that bad in the video.

http://s447.photobucket.com/albums/qq191/delbertmarriott/?action=view&current=Movie26-1.flv

Mwilson408
Jan 19th, 09, 10:49 PM
Strange....the sound was playing but on photobucket it plays. Anyways, this is a better video of my son Jake and I freezing at 11pm yesterday to video the car and the sound. The car is filthy but doesn't look that bad in the video.

http://s447.photobucket.com/albums/qq191/delbertmarriott/?action=view&current=Movie26-1.flv


Car doesnt look fithy, but is the steering wheel on the wrong side?

Sinister
Jan 19th, 09, 11:42 PM
No. The laptop videos everything backwards. Good observation.

texasgilbert
Jan 20th, 09, 2:50 AM
Here's my 71 idling with XE294H Comp cam, 2.5 inch exhaust with the cheapest mufflers I could find, Thrush ovals. http://www.youtube.com/watch?v=AEaXUdrSewc

GR868
Jan 26th, 09, 9:21 PM
3" Pypes exhaust with x pipe and street pro pypes mufflers. 454 .030 over
770 street avenger, rpm air gap intake, GM open chamber heads, erson roller rockers, trw flat top pistons.

http://s287.photobucket.com/albums/ll150/ragdollbailey714/?action=view&current=100_4159.flv

Rokker
Feb 1st, 09, 8:58 AM
Here`s mine zz502, 1965 Chevelle. Headers, 3" summit exhaust, 3" Flowmaster 40`s. No crossover or x pipe.

YouTube - ZZ 502 Chevelle donuts

Rokker
Feb 22nd, 09, 6:37 AM
And here is my other Chevrolet, 1971 Camaro 350,
Headers, summit 2 1/4", turbo mufflers (in the kit).
Wasn`t expecting much sound wise but I think it sound pretty cool for what it is..
No problems with fitting and looks nice and tidy.

http://www.youtube.com/watch?v=U5lRFexLN7s

69Bill
Feb 23rd, 09, 11:17 AM
Il ike all the videos that worked thanks keep up the good work some day

rrmcy
Feb 23rd, 09, 12:10 PM
http://i167.photobucket.com/albums/u140/rrmcy/th_engine1-1.jpg (http://s167.photobucket.com/albums/u140/rrmcy/?action=view&current=engine1-1.flv)

JS408CI68
Mar 11th, 09, 12:49 PM
Just trying to bring this thread back again.

Here is my 408bb with super 44s ending under the car
YouTube - 408 big block

Here is the incar shot of the super 44
YouTube - interior sound of super 44s

jmartorana
Mar 11th, 09, 3:38 PM
http://i254.photobucket.com/albums/hh119/jmartorana/th_MVI_7773.jpg (http://s254.photobucket.com/albums/hh119/jmartorana/?action=view&current=MVI_7773.flv)

rrmcy
Mar 11th, 09, 7:38 PM
http://s167.photobucket.com/albums/u140/rrmcy/?action=view&current=MVI_12011.flv

1phat72
Mar 11th, 09, 9:23 PM
jmartorana, the 502 sounds awesome, what cam are you running in the 502?

Heckeng
Mar 11th, 09, 10:19 PM
Gen VI 454 with 8.75:1 compression, 502/502 HR cam, RPM Air Gap intake, Mighty Demon 750, Hooker 2" to 3.5" headers, 3" exhaust with original Flowmaster 50 series mufflers

http://www.youtube.com/watch?v=R-9QYhaA_VA

69SSpost
Apr 4th, 09, 10:13 PM
bump :cool:

Bigdogss
Apr 5th, 09, 4:30 AM
to bad this thread isnt a sticky..... some great sounding cars on here!!!!:hurray::beers:

69SSpost
Apr 6th, 09, 7:12 PM
This is a great candidate for a sticky....hint hint :secret:

texasgilbert
Apr 6th, 09, 9:07 PM
This is the Chevelle I'm selling on Ebay right now. 4-06-09. XE294 Comp cam, 2.5 inch pipe and Thrush welded mufflers.
http://www.youtube.com/watch?v=QlkC_uvGm6k

Elcoman
Apr 6th, 09, 10:23 PM
Gen VI 454 with 8.75:1 compression, 502/502 HR cam, RPM Air Gap intake, Mighty Demon 750, Hooker 2" to 3.5" headers, 3" exhaust with original Flowmaster 50 series mufflers

http://www.youtube.com/watch?v=R-9QYhaA_VA

l:) My girl said I am listening to this like it's music, I told her that's because it is.:D

Ramrodd 69
Apr 7th, 09, 10:07 AM
Has any one used the Flowmaster Race Muffler. I talked to one of there tech guys about using them on street and he advised me not to due the fact they are basicaly open header muffler. I told him I want loud. He said it would easily set off alarms just going by car its that loud. It has me worried that the cops will be pulling me over. Has any one used them, even on strip. Are they really that loud (open header). Thanks!

Rokker
Apr 8th, 09, 8:46 PM
Here`s a better sounding video of my zz502, headers 3" flowmaster 40

http://www.youtube.com/watch?v=zWms2FlYPOc

Southern72
Apr 9th, 09, 1:40 AM
Got rid of the Flowmasters and went with some Magnaflows.

http://i259.photobucket.com/albums/hh284/jamisonhes/th_MOV02225.jpg (http://s259.photobucket.com/albums/hh284/jamisonhes/?action=view&current=MOV02225.flv)

Helmet
Apr 9th, 09, 1:23 PM
Who needs mufflers?:D

YouTube - Chevelle w/ Open Headers

trmnatr
Apr 9th, 09, 1:30 PM
Who needs mufflers?:D

YouTube - Chevelle w/ Open Headers (http://www.youtube.com/watch?v=0TY205W_D0w)

327 open headers :D


http://i510.photobucket.com/albums/s347/331Trmnatr/th_MVI_0362.jpg (http://s510.photobucket.com/albums/s347/331Trmnatr/?action=view&current=MVI_0362.flv)

Ramrodd 69
Apr 11th, 09, 8:32 AM
565 Chevy, 4" Sprint car style short muffler and downturns.

http://s162.photobucket.com/albums/t280/CollinsAutomotive/?action=view&current=MarkSmithALLMotor.flv

Car sounds healthy. What brand name are mufflers. Looking for
that sound. Thanks!

bracketchev1221
Apr 11th, 09, 8:44 AM
Car sounds healthy. What brand name are mufflers. Looking for
that sound. Thanks!

Almost 1000 hp helps too.

mkube396
Apr 28th, 09, 10:46 AM
well i got most of the exhaust pipes on I just need to install the back 1/2 we ran out of light and i need to get mounts to holed the back 1/2 up. so we shot this vid.

P.S it is the Pypes system and note the down pipes where not made for my car and had to be cut and moded to fit right

http://s190.photobucket.com/albums/z172/mkubiak402/test/?action=view&current=newvid.flv


http://i190.photobucket.com/albums/z172/mkubiak402/SUC50053.jpg

http://i190.photobucket.com/albums/z172/mkubiak402/SUC50057-1.jpg

http://i190.photobucket.com/albums/z172/mkubiak402/SUC50062.jpg

Bigdogss
Jun 11th, 09, 8:44 PM
i love this thread :yes: didnt want it to get lost! i know there are more video clips out there!!:hurray:

1badss396
Jun 11th, 09, 9:08 PM
Here is mine on the cover of http://www.gardnerexhaust.com/ (http://www.gardnerexhaust.com/):D

Kevin R
Jun 12th, 09, 12:35 AM
Flowmaster 3" pipes with Pypes Race Pro Mufflers,,, 427 BB



http://i80.photobucket.com/albums/j180/oldboxman/th_Kevins2ndburnout.jpg (http://s80.photobucket.com/albums/j180/oldboxman/?action=view&current=Kevins2ndburnout.flv)

Mastif
Jul 12th, 09, 8:45 PM
Im pulling off my 2.5" Flowmasters tomorrow and replaceing them with a set of Turbo's.
I need to mellow it down some.

GotSpray
Jul 12th, 09, 9:40 PM
keep em coming!!

vegadan
Jul 12th, 09, 10:31 PM
if this works ill make a good 1
<embed width="448" height="361" type="application/x-shockwave-flash" wmode="transparent" src="http://i183.photobucket.com/player.swf?file=http://vid183.photobucket.com/albums/x193/vegadan/65%20chevelle/vidio002.flv">

vegadan
Jul 12th, 09, 10:32 PM
nope i didnt get it
sorry for the wast of space

67ss
Jul 12th, 09, 10:45 PM
Here's my 383 11:1 with 2 1/2" super 44s.
http://i216.photobucket.com/albums/cc305/jp71ss/Backyard/th_Nova060.jpg (http://s216.photobucket.com/albums/cc305/jp71ss/Backyard/?action=view&current=Nova060.flv)

Jcdubs
Jul 13th, 09, 5:57 PM
400 sbc, 2.5 Flowmaster pipes, Dynomax race ovals


http://www.youtube.com/watch?v=vLy4q6YRww0

crankitup
Jul 15th, 09, 12:27 PM
Here's mine, 3" with an H pipe, 3" Hooker arochambers, and 3" flowmaster tail pipes. I also have cutouts but they were caped during this video.

http://www.chevelles.com/forums/showthread.php?t=280025

JS408CI68
Aug 10th, 09, 10:54 AM
If anyone was wondering what those summit race mufflers sound like well I just put them on mine. They are real loud, maybe cause its 3 inch idk.

Well here is a short messed up video, my camera died 9 seconds in so thats all I got. Better video coming later and the ticking you hear is the collector gasket leaking :sad: I got to get new ones.

Here the muffler: http://www.summitracing.com/parts/SUM-638253/?image=large

Here is the video: http://www.facebook.com/home.php?#/video/video.php?v=102724679738135

dadeo-3
Aug 10th, 09, 11:42 AM
My video is in my signature. Turn it up!

Chicken Coupe
Aug 10th, 09, 12:18 PM
Anyone have a sound byte or video of a roughly 500" BBC with a cam something like this (solid roller cam 282-251-.725 \ 288-257-.725 \ 112sep) and a 3" Pypes w/ "X" and their Violator mufflers?

I need a reminder of what I am missing until it's finished.

Thanks in Advance! :thumbsup:

o6r1man
Aug 10th, 09, 12:21 PM
3" Jegs X-Pipe with dynomax 4" round ultra flows 18" long

http://i278.photobucket.com/player.swf?file=http://vid278.photobucket.com/albums/kk110/06r1man/005.flv">

65lkey
Aug 10th, 09, 12:23 PM
3" Jegs X-Pipe with dynomax 4" round ultra flows 18" long

http://i278.photobucket.com/player.swf?file=http://vid278.photobucket.com/albums/kk110/06r1man/005.flv">


Nice :thumbsup:

chvl71402
Aug 10th, 09, 1:45 PM
6.0 LS with a cam...mufflers... smufflers who needs 'em!
YouTube - LS Mustang

chvl71402
Aug 10th, 09, 1:48 PM
383 with AFR 195 Eliminators, Comp HR294.

YouTube - 57 vette 2

peterskin
Aug 10th, 09, 8:18 PM
I'm diggin this thread...sorry nothing to offer yet!

69SSpost
Aug 17th, 09, 9:51 PM
Heres a real crappy vid i just took of my 67 with my cell phone,the sound quality is horrible.I needed a reason to bring this post back.....


496 9.7.1 Harolds 279/284 sft on a 112 ,049's,Hooker super comps,3 inch with super 44's and dumps YouTube - 67 chevelle 496 bb

MallyMal S-3
Sep 4th, 09, 5:58 PM
pretty stock small block, 2.5 straight piped from headers to flowmaster mufflers

http://www.youtube.com/watch?v=GBM5HbfEqpc

Highway Star
Sep 4th, 09, 6:07 PM
I like that car, Chris. It is cool.

MallyMal S-3
Sep 4th, 09, 6:29 PM
thanks highway. hopefully i'll have her looking as prestine as yours before i graduate college

Mikeys69
Sep 7th, 09, 12:05 AM
Used a standard camera with video. Not very good sound.
Discovered the speaker was sitting on the ground shooting the video.
http://s572.photobucket.com/albums/ss168/bigred406/?action=view&current=Picture004_converted.flv

camarofreak
Sep 7th, 09, 2:18 AM
350hp 327 in my 68 vette with hooker side exhaust!! sorry bout the vid it is shakey!!!
http://i15.photobucket.com/albums/a351/Tonystoys123/th_Picture584.jpg (http://s15.photobucket.com/albums/a351/Tonystoys123/?action=view&current=Picture584.flv)

Grayson454
Sep 22nd, 09, 10:59 PM
YouTube - 454 V-drive

454 bored 30 thou, 286H Comp Cam , Pro comp Aluminium heads port matched , Dual Plane COPO manifold , 850 Demon Vac sceondary
10.2 compression

In my boat :thumbsup: