|
blaster Jul 11th, 02, 11:47 PM Most of the frame and rear underbody is painted with POR-15. It looks great but there are areas that are way to hard to get with a brush. Has anybody sprayed it ? How thin should I make it and is it really messy? My body is literally dotted with POR from doing it this week. I even had some specks on my teeth! Bad67SS Jul 12th, 02, 7:45 AM I ONLY spray this stuff. Comes out real nice. Have to use the thinner POR recommends though. Add about 10-15%. dreinecke Jul 12th, 02, 8:59 AM Be SURE to wear a respirator. I've shot this in good ventilation with a normal mask, and it's not nearly good enough! Stopped immediately and got a resp. READ THE WARNINGS ON THE CAN -IT'S FOR REAL!!! Other than that, it's great stuff and looks fab when sprayed! ------------------ David Reinecke - aka - FINE 68 1968 Chevelle 300 Sport Coupe Deluxe http://home.att.net/~thereineckes/ airrj Jul 12th, 02, 9:57 AM If you read the can the say to use a Supplied Air Resperator or an Self Contained Breathing Apparatus. This is serious stuff. They don't want you to filter the air around you, they want you to be supplied pressurized air from another source. Be Safe. ------------------ R.J. 1972 Chevelle TC Member #1525 RJ's website (http://www.buffnet.net/~airrj/) MAXX2 Jul 12th, 02, 9:37 PM 100% proper ventilation or ? Having said that, we have done several areas our our '69. Sprayed the firewall, it made us "Professionals" (POR Silver)! Shame that we covered it up with stainless steel. Hope this helps/ ------------------ Team Members Forever #341 Richard, Judy, MAXX2 '69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi. Wooderson Jul 13th, 02, 1:05 AM I've got a VW daily driver that is in pretty good shape with just minimal surface rust on the underbody. Any ideas on how much material and cost to do a smaller car underbody? Randy Mosier Jul 13th, 02, 1:09 PM Heed the warnings about the effects of overspray and use proper breathing equipment. Also, the overspray will settle on you garage floor. Don't walk through it barefooted like someone else I know. http://www.chevelles.com/forum/redface.gif It'll stick to the bottom of your feet for a few days!! | ||