I am currently running an Edelbrock Performer RPM manifold on my 396. I would like to eventually get the correct fuel lines on it..its a 350HP car but I am running a single fuel line with an inline filter down near the fuel pump.

I want to use the factory style filter mounted near the water pump, with the vent line return (and paint the manifold orange for a more stock look)..but when I tried doing it before, nothing seemed to fit right..the more I think about it, maybe it was a combination of the aftermarket lines/filter (larger?) and orientation of the upper hose coming off the RPM manifold?

Is anyone else running the RPM with the stock style lines and filter? Pics? How'd you do it?

I hope this helps you out, this is stock. I got all my lines at rightstuffdetailing.com for my 396/350
http://img79.imageshack.us/img79/5483/1001516be5.th.jpg (http://img79.imageshack.us/my.php?image=1001516be5.jpg)

that is helpful..good photo, and what I am looking at making mine look like..I had all of the stuff before, but I returned it, as none of it seemed to fit the way it was supposed to.

If someone has a similar photo, using a performer rpm manifold, with the stock lines and filter as shown above, i'd love to see it.

that is helpful..good photo, and what I am looking at making mine look like..I had all of the stuff before, but I returned it, as none of it seemed to fit the way it was supposed to.

If someone has a similar photo, using a performer rpm manifold, with the stock lines and filter as shown above, i'd love to see it.
I have a performer 2-0 which the plenum isn't much if any shorter than the Performer RPM I believe.

that is helpful..good photo, and what I am looking at making mine look like..I had all of the stuff before, but I returned it, as none of it seemed to fit the way it was supposed to.

If someone has a similar photo, using a performer rpm manifold, with the stock lines and filter as shown above, i'd love to see it.

JTM60,

I've got the exact same set up on my Elky as "Bad Brad" but I'm using the Edelbrock 2161 Performer. I'll try and take a pic of it in the AM and post it. It took about a 1/4" bend to make it fit compared to the stock cast iron intake I took off. It was a piece of cake. Now, finding the right fuel folter....that's a whole other story. If anyone has a GF432 and would like to share I still need a couple. ;)

cool, keep the info comin'!

Dave, so long as you aren't looking for NOS, they Repop the 432. otherwise it's 50-100 on fleebay.

The repop 432 i had seemed like it was too large a diameter to work properly..anyone ever compared them side by side?

Dave, so long as you aren't looking for NOS, they Repop the 432. otherwise it's 50-100 on fleebay.

Thanks Brad (Oops ....Bourgeois!). Theye WERE making them repro but they stopped. No none seems to have any anywhere and no one knows when they will start making them. I spoke to the guy that had been making them for the last 10 years. :(

The ones that are available as was said above are not the same size and will not fit in the original bracket without some "engineering".

Dave 136679ss is Jason, not me, lol.
I was lucky when I got my gf432 filters I got a few of them just so I would have some extra. I think I have 2-3 extra for everything for my 69 so far:D.

Dave 136679ss is Jason, not me, lol.
I was lucky when I got my gf432 filters I got a few of them just so I would have some extra. I think I have 2-3 extra for everything for my 69 so far:D.

Jeezuz Dave, PLEASE DON'T confuse me with this guy. :D

Jeezuz Dave, PLEASE DON'T confuse me with this guy. :D

Too funny...I guess I got confused by all the #'s in your names! :D I promise it won't happen again!

Dave 136679ss is Jason, not me,:D.


Jeezuz Dave, PLEASE DON'T confuse me with this guy. :D

has anyone actually ever seen them in the same room :secret::D

has anyone actually ever seen them in the same room :secret::D
That's cruel Seb, but plenty of people saw us side by side last year at CB 06.

That's cruel Seb, but plenty of people saw us side by side last year at CB 06. I was trying to hide.......:D

I was trying to hide.......:D
Believe me, I'm glad you were. It was very difficult to admit to that, but it had to be done since Seb insinuated I might be you. OH, the HORROR!!

That's cruel Seb, but plenty of people saw us side by side last year at CB 06.

I'm dying here,ROFLMAO, you weren't holding hands too were ya! :D

I'm sorry guys ...it was just to easy, only kidding. ;)

Lmao, Jason even tried to get me to drive into a rock wall at 90 mph:yes:

I'm dying here,ROFLMAO, you weren't holding hands too were ya! :D

Brad wanted to, but.......................My wife and I thought it was too wierd:D

Lmao, Jason even tried to get me to drive into a rock wall at 90 mph:yes:
LMAO, so he google earthed it and emailed it to me. NICE!!!!

BTW Dave, if you get the reproduction bracket for the repop GF432 it works out just fine.