Could someone please tell me how the inner and outer door fuzzies are attached? I need to remove them and I don't want to destroy them. Thanks, Mike, M22

Door fuzzy removal requires you removing the door panel,and lowering the window stops so you can access the screws that hold them on.Window stop/bolts are located near the bottom of the door..3/8 or 7/16 I think.For the side glass,you need to remove the rear panels to get to everything as well.

------------------
1970 Chevelle SS396/M20/4.10 My 70 SS396 (http://www.chevelles.com/showroom/mr4speed70SS1)
Engine pic (http://chevelles.com/showroom/mr4speed70SSengine2)
1970 Chevelle SS454My 70 SS454 (http://chevelles.com/showroom/mr4speed70ss454)
1968 Oldsmobile Cutlass convertible
1982 Oldsmobile Cutlass 350 Olds,TH350(daily driver)
Chris Corwel,TC Member 785

There attached with a gator type clip. There pretty hard to get off sometimes with out bending them. There is about 5or6 on each felt. You can reach up in there and feel them.