I have a 66 Malibu 2 dr HT. I have misplaced the diagram for placement of the 5 body mounts. There are 6 locations for a convertable application (which mine is not).

Is the one not used by a HT the one close to the rear spring perch? Or is the one just in front of the rear wheels?

convertibles use both front locations behind the front fender for a total of 4 up front, normally the hardtop doesnt use the two innermost mounts closest to the engine. At least that is what I remember, its been over 10 years since I took a 66 off its frame.

------------------
Dave
70 chevelle ss396 conv
66 chevelle ss396 hdp/conv
72 chevelle
55/57/61 chevies
TC member #493
Never forget Earnhardt!

[This message has been edited by drptop70ss (edited 01-17-2002).]

Mcdonald,
I'm not back to that point yet on my project so I cant remember about the mounts in front of the rear tire but I'm possitive that the mounts by the upper rear spring perches are used. The reason I can confirm this is that both bolts broke off in that location and I can see them still sticking out waiting to be removed http://www.chevelles.com/forum/frown.gif Hope someone else can confirm the rest for you.

------------------
Proud owner of a 66 chevelle thats in the middle of restification Nick a.k.a POPS
Member #387

[This message has been edited by pop (edited 01-18-2002).]

My 66 Malibu does not have mount in front of the rear wheel.

Rene
66_Malibu

Thanks guys.

My car just came back from the paint shop. I am putting it back on the frame.

I will post some pics in the next day or 2.

Larry

Cool, I'd like to see them