By looking at these pics can anyone tell me if its a complete kit for a auto to manual tranny swap?
Any questions I should ask the seller as far as needed parts and possible wear and tear?
Also, should there be part #'s stamped on the pedal assembly so I can cross check them to make sure they are correct for my application?
Im not familiar with manuals so any help would be great.
http://i17.ebayimg.com/03/i/000/91/36/fd3b_0.JPG (http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=260095405761&indexURL=3#ebayphotohosting)

You'll also need:
Throwout bearing
Flywheel
Clutch disc
Pressure plate
Crankshaft bushing
Shifter/boot/linkage
Transmission
Bell housing
Throwout fork
Maybe trans mount
Maybe you have the above already, but I'm thinking "complete".
Rich

Damn! It sold already :mad: .

Good price too. I should have pulled the trigger.

You can buy the rods,springs, cross shaft, frame bracket, ball studs all new. At the Elcamino Store. The pedals you have to find used though.:)