where is a good place to get just a fuse block and firewall connectors? i don't need the whole wireing kit. really just where the connectors come thru the firewall. it is for a 64 ss malibu with auto and a 327. hate to wait till spring to rumage thru the local junk yard.:sad: :confused:

Cannot guarantee for a '64, but give American Autowire/Factory Fit a call. They have a seperate catalog for the OEM reproduction harnesses and if you read all the way to the bottom of the long list of harnesses for your model, you just may find a fuse block. I went this route on my '68 and it cost me about $75.

As to the firewall bulkhead, do you have a problem with terminals or with the connector body? The terminals are replaceable within the connector body and you can get those from AAW too.

PROBLEM YES!!! THE GUY WHO HAD THIS CAR BEFORE PAINTED OVER, INSIDE, AND OUTSIDE THE CONNECTORS!!!!! THE PLASTIC IS PRETTY WELL "ATE UP" I WILL TRY TO SAVE THEM THE BEST I CAN, BUT NEW ONES WOULD BE BETTER. I AM RIGHT NOW REWIREING THE ENTIRE FRONT OF THE CAR, I.E. FROM FIREWALL FOREWARD. ALL I CAN THINK IS WTH!!!
WIRES MELTED TOGETHER AND SPLICES EVERYWHERE.:sad: :mad:






IT IS A TRUE 64 SS, THAT IS WHAT KEEPS ME GOING:yes: :thumbsup: