I have a:

454 +.060
820 oval port heads, been mildly cleaned up
2.19/1.88 valves
Speed pro Hypers .300 dome
Weiand excellerator single plane (for now) manifold
mallory unilite dist.
MSD digital 6
Hooker Comp headers
3" exhaust w/ flowmasters
TH-350
3200 stall
3.73 rear end
Pretty much stock weight 69 chevelle

The part I need to know if it will work good is the cam I am thinking of sticking in it. I am thinking of going with the Lunati 402A5LUN and the valve train kit that matches it. The cam is 285/295 adv. 252/261 .050 .595/.595 lift 110/104

Is this cam a good match for the rest of the combo? I would like it to have somewhat decent street manners (rough idle I couldn't care less about), I won't be racing it all that much, (maybe a few passes per year).

Should I go ahead with it or do any of you recommend something diffrent?Please don't tell me to go roller right now, I am currently taking out a cast core comp roller and the endure-x lifters and it's not in the budget to go roller again right now.

Thanks guys, Jeff

No way to tell unless you install it and run it. My guess is it will be kind rumpy. But who knows, you may like the way it runs.

Anybody else know if this will be a good cam to go with the rest of my combo? I would like to order this week, just looking for some help on cam choice.

Jeff