|
von Feb 17th, 07, 6:26 AM I bought a used box from an '85 Monte Carlo SS to put in my '69 Malibu. With the MC pitman arm on it, it has about 1/32" to 1/16" play measured at the tie rod end of the arm. Is this acceptable or should/can it be adjusted out before installing the box? rbwjr325 Feb 17th, 07, 7:15 AM You can adjust it but dont get it too tight. JIML82 Feb 17th, 07, 8:47 AM This paper describes how to adjust a Saginaw power steering gear. http://jimshea.corvettefaq.com/wp-content/uploads/2006/01/RBGDisassembly&RepairPics4.doc You will need a torque wrench that measures in inch-lbs. JIML82 | ||