I am getting ready to order a SATA digital2 gun with a 1.3mm tip for a good clear gun. My question is my air comp. can easily handle 15.1 cfm @29psi so should I go with the 10.3 cfm RP model or not? :cool:

Zach you sure those are the numbers on the RP? I could swear that the RP is higher then 10cfm, am not for sure either.

Anyway, I use a RP 1.3 at work for clear running at 30-34psi depending on the clear I spray.

your compressor can handle 15 it can hanlde the 10.3. I love the RP sweet little unit, the digital readout is WAY to nice IMO

10.3 cfm at 29 lbs. Digital readout is COOL, Sata has a good site that even lists all the paint manufactures and what gun and tip they recommend,just can't find it!! Mike

Thanks guys, spraygunworld.com says the 10.3 @29psi, they also say $389 free shipping but I will check ebay! Mike I have seen stuff for the Sata site I will have to find them again.