What did you guys use to mount the soft line to the diff, i just have mine hanging loose now and need to get it mounted somewhere.

Thanks Bill

Bill

Bill
My chevelle has a narrowed 9 inch in it and it has a stud welded on to the axle housing on the drivers side with a home made bracket for the (distribution block) to mount to, with a hard line then going to the passenger side drum and one to the drivers side drum

Pretty much make your own........

Im trying to picture what Ford did to mount it. Might be worth looking to see what they use and grab one off a donor vehicle. Cant be that hard to find one, they used so many of those rearends.

Just make a small bracket that comes off of the top bolt of the center section. Then you don't have to drill any holes in the rear end.